Makita P-36295 180 Grit 1/2 Sanding Sheets - 10 Pcs/Set

Grit: 180; A abrasive: aluminum oxide; Backing: heavyweight paper; Size: 115 mm x 280 mm; Type: open-coat with resin glue coating; Pack: 10 sheets per set; Compatibility: suitable for 1/2 sheet orbital sanders and many leading brands.

They are sized for 1/2 sheet orbital sanders and are compatible with Makita 9045N and 9046 models, as well as other leading brands that use a 1/2 sheet format.

1) Power off and unplug the sander. 2) Place the sheet flat on the sander pad, aligning it with the mounting area. 3) Secure the sheet using the sander’s clamp or fastener mechanism, ensuring it lies flat with no wrinkles. 4) Plug in and start at a low speed to test fit. 5) When the sheet clogs or wears, power off, remove, and replace with a fresh sheet.

Open-coat means the abrasive grains are spread with more open space between them. This reduces loading (clogging) when sanding softwoods or painted surfaces, improves dust removal, and tends to provide a more consistent cut and longer sheet life.

They are suitable for wood (softwood and hardwood), metal surfaces, and painted surfaces where fine finishing or deburring is desired.

Keep the sander moving with light to moderate pressure and work in even passes. Avoid staying in one spot too long to prevent gouging. For finishing, use multiple light passes rather than a few heavy passes, and maximize results with a clean, dust-free surface.

Utilize dust extraction if your sander supports it, avoid excessive downward pressure, and keep the workpiece and sheet clean. When you notice clogging or reduced cut rate, replace the sheet promptly to maintain a consistent finish.

Wear safety glasses to protect your eyes and a dust mask or respirator to avoid inhaling sanding dust. Work in a well-ventilated area and unplug the tool before changing sheets.

Yes. Purchasing a set of 10 sheets provides a lower cost per sheet and ensures you have ready-to-use replacements when one sheet wears out, helping maintain steady progress on projects.

Store unused sheets in their original packaging in a dry, cool place to prevent moisture damage. Dispose of used abrasive sheets according to local regulations for paper and metaldust waste; if possible, recycle where facilities exist.

For softwood, use light, even passes to avoid tear-out. For hardwood, work with consistent pressure and consider sanding with a progression from 180 to a finer grit if a super-smooth finish is required. For painted surfaces, scrub lightly to avoid penetrating the paint film; always test on a hidden area first.