Makita P-37122 K100 Grit 76 x 457mm Sanding Belt Set - 5 Pcs/Set

Belt size: 76 mm x 457 mm (3 inches in width); grit: K100 (100 grit).

They are designed for Makita belt sanders such as the 9910 and 9911, and other compatible 3-inch belt sanders that accept 76 x 457 mm belts.

They’re suitable for wood, varnished wood, painted surfaces, and ferrous metals, providing a smooth finish.

Ensure the sander is powered off, release belt tension, slip the belt over the rollers with the abrasive side facing outward, align the belt, re-tension, and run briefly to check tracking.

Closed-coat construction provides longer belt life and reduces loading/clogging, delivering consistent sanding performance.

Five belts are included in the set. Replace when they become dull, create burn marks, wear irregularities, or show visible damage.

Wear eye protection and a dust mask, work with steady even pressure, avoid overheating the workpiece, and ensure the belt is properly tensioned and tracking before use.

Smoothing wood surfaces, removing old finishes, prepping painted surfaces, and light material finishing on metal when appropriate.

This Makita-branded belt set uses aluminum oxide with closed-coat construction, offering durable, uniform sanding. For alternatives, you can browse similar 100-grit 76x457mm belts on Fepy here: https://fepy.com/search?q=76x457mm+100+grit+sanding+belt

Yes, the 100-grit belts are well-suited for removing varnish and prepping surfaces prior to finishing.

Store belts flat in a dry place, avoid excessive heat or humidity, and keep them in their original packaging to prevent contamination and glazing.