Makrite 302P2VW, FFP2 NR Respirator with Valve, 15Pcs/Pack

FFP2 NR means it meets European FFP2 filtration standards and is non-reusable (single-use). It provides a high level of protection for particulate matter typical in industrial settings, with lower breathing resistance than many heavier respirators.

The valve helps reduce heat and moisture buildup inside the mask, increasing comfort during long wear times. Use the valve-equipped version when you’re performing tasks that generate heat or moisture, but note that the valve is for comfort and does not increase filtration efficiency.

Key specs include: FFP2 NR filtration, lightweight vertical fold design, adjustable nose clip, optional foam seals, optional one-way valve, optional activated carbon filter, and a pack size of 15 pieces per pack.

Wash hands before handling, place the respirator over the nose and mouth, pull the straps over the ears, adjust the nose clip to create a snug seal, and ensure the respirator covers both nose and chin. If available, use the foam seals for an even better seal and comfort.

For the valve, align it with the valve port on the respirator and press until it seats securely. For the activated carbon filter, remove any protective covering, align with the designated port, and attach firmly. Always follow the included instructions to ensure a proper seal.

Ideal for industrial tasks that generate dust, aerosols, and particulates—such as grinding, sanding, painting prep, construction work, and general shop environments where clean air is important.

Compared to other FFP2 respirators on Fepy, the Makrite 302P2VW emphasizes a soft-touch feel, a contoured vertical fold for a better facial seal, and optional features like a one-way valve and activated carbon filter for enhanced comfort and versatility. For direct comparisons, see these related Makrite models on Fepy: https://fepy.com/products/makrite-302p2v-ffp2-nr-respirator-with-valve-15pcs-pack, https://fepy.com/products/makrite-302p2nr-ffp2-nr-respirator, and https://fepy.com/products/makrite-310p-ffp2-nr-respirator-with-valve-15pcs-pack

Store in a clean, dry place away from contamination. Since this is an FFP2 NR (non-reusable) respirator, dispose of it after use in accordance with local regulations and your workplace guidelines. Do not attempt to wash or reuse.

Yes, with a 15-piece pack, it offers cost-effective protection for teams or long-term projects. The option to add features like a valve or activated carbon filter also lets you tailor comfort and performance to your needs, helping you get more use out of each pack.

This respirator is designed for particulate protection (FFP2 NR) and is intended for industrial environments. It is not a medical device or suitable for all high-hazard atmospheres. Always ensure a proper fit, use in well-ventilated areas, and pair with other required PPE (eye protection, hearing protection, etc.) as needed for your task.

Check that the product title matches Makrite 302P2VW FFP2 NR Respirator with Valve, verify the listed features (valve option, carbon filter option, vertical fold design), and confirm the product URL corresponds to Makrite on Fepy. If you’re unsure, compare the listing details with the official Makrite product references on Fepy to ensure authenticity.