Mapei Conductive Reactive Adhesive, 10Kg, Suitable for Antistatic Rubber and PVC Floor Coverings in ESD Areas

It is suitable for ceramic, porcelain, terracotta, klinker, glazed stoneware and ceramic mosaic tiles, as well as some natural stones. It bonds effectively to common substrates used in walls and floors when the surfaces are properly prepared.

The conductive paste helps improve bonding performance on problematic substrates and can contribute to a robust, long‑lasting bond, even under thermal or substrate variations.

The product is sold in a 10 kg bag. It is a cement‑based tile adhesive formulated for high adhesion and durability, suitable for wall and floor tiling on a range of substrates.

Mix with clean water until a smooth, homogeneous paste is achieved. Follow the bag instructions for the exact water ratio and mixing technique, and use a suitable mixer or trowel to reach the recommended consistency.

Apply using appropriate trowel notches for the tile size and substrate, using a back‑bedding method when needed. It is suitable for both wall and floor tiling, with care taken to achieve even coverage and a stable bed for the tiles.

Open time, pot life and curing conditions depend on ambient temperature and substrate, and should be followed as specified on the product bag. Ensure tiling is completed within the recommended open time and allow proper set before grout or other finishes.

Grouting should be performed after the tiles have set per the bag instructions and under suitable ambient conditions. Times vary with temperature and humidity, so refer to the product guidelines on the bag for exact recommendations.

Wear appropriate PPE such as gloves and eye protection. Work in a well‑ventilated area, avoid skin contact with the powder, and follow the safety data sheet and local regulations for storage and handling.

Compared to other tile adhesives on Fepy.com, Adesilex G19 Conductive emphasizes its conductive formulation for challenging substrates and broad tile compatibility. For similar options, you can consider Adesilex P10 as an alternative, and Ultralite S1 as another cementitious adhesive option—both of which are available on Fepy.com. Product pages: Adesilex P10: https://fepy.com/product/mapei-adesilex-p10; Ultralite S1: https://fepy.com/product/mapei-adesilex-ultralite-s1.

Yes, Fepy typically offers return options subject to standard terms and conditions. It's best to confirm eligibility and any return window with the seller or through Fepy’s returns process on the site.

It offers strong adhesion and durability for a wide tile range on walls and floors, with a conductive formulation aimed at improving performance on challenging substrates, which can translate to faster installation and reliable long‑term results.

Store the bag in a dry, sheltered area away from moisture and extreme temperatures. Keep the bag sealed when not in use to preserve its performance and extend shelf life.