Mapei Adesilex P7 25Kg Premium-Grade Tile Adhesive - White

Adesilex P9 has a pot life of over 8 hours, an open time of 30 minutes, and a waiting time before grouting of 4-8 hours for walls and 24 hours for floors. It sets to light foot traffic in approximately 24 hours and is ready for use in around 14 days. It is classified as EMICODE EC1 Plus, indicating very low emissions.

Adesilex P9 can be used for interior and exterior floor and wall bonding of all types of ceramic tiles and mosaics on conventional walls with cementitious renders, cementitious screeds, anhydrite screeds, gypsum walls, painted interior walls, existing terrazzo or marble floors, and suitably cured concrete structures.

The consumption rate of Adesilex P9 is 2-5 kg/m2. It is available in 25 kg bags and 4x5 kg boxes.

Mapei Adesilex P10 is a high-performance white cementitious adhesive with no vertical slip and extended open time for glass, ceramic, vitrified mosaic and tiles, and natural stone.

Mapei Adesilex P7 is a high-performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles. It is used for interior and exterior bonding.

Mapei Adesilex P7 is a high-performance cementitious adhesive designed for bonding ceramic tiles, porcelain, and mosaics on various surfaces, including floors, walls, and ceilings. It is available in both grey and white formulations and comes in 25 kg bags.

Adesilex P7 is highly thixotropic, allowing it to be applied on vertical surfaces without sagging. It offers excellent adhesion to a variety of materials and minimizes shrinkage during curing. The adhesive also has a pot life of over 8 hours, making it user-friendly.

The adhesive should be applied at temperatures ranging from +5°C to +40°C. This ensures optimal performance and adhesion during the installation process.

Surfaces bonded with Adesilex P7 can typically be set to light foot traffic after approximately 24 hours. However, full use of the surface may require up to 14 days for complete curing.

To prepare the adhesive, mix 100 parts of Adesilex P7 with 24-26 parts water by weight. This will yield a creamy paste that is easy to work with during application.

Yes, Adesilex P7 is suitable for both interior and exterior applications. It can effectively bond tiles in outdoor environments as long as proper installation practices are followed.

Avoid using Adesilex P7 on surfaces that are subject to extreme flexing or vibration, such as wood or metal. Additionally, ensure that all substrates are clean, flat, and free from contaminants before application.

Grouting can typically begin after 4-8 hours for wall joints and 24 hours for floor joints after the tiles have been installed with Adesilex P7. This timing helps ensure proper adhesion before additional work is done.

MAPEI Adesilex P7 is a high-performance cementitious adhesive designed for interior and exterior tile and stone installations. It provides strong adhesion to a variety of substrates (both absorbent and non-absorbent) and is suitable for ceramic tiles, porcelain, glazed tiles, and natural stone.