Mapei Epoxy Grout, 10Kg, Used for Dark High-Contrast Joints in Modern Bathrooms and Commercial Interiors - Anthracite

It is intended for indoor tile installations and works for both walls and floors, delivering a durable bond on interior surfaces.

Kerapoxy can bond tiles onto a wide range of substrates, including concrete, ceramic, stone, terracotta, mosaic, glass, and plaster.

Kerapoxy is available in 5 kg and 10 kg packs.

The product can be used in areas up to 20 m2 with varying degrees of surround, depending on tile size and grout thickness.

Mix the two components thoroughly according to the label until uniform. Apply with a suitable trowel, spread evenly over clean, dry surfaces, and follow the manufacturer’s instructions for pot life and curing.

After curing, Kerapoxy forms a high-strength bond with excellent chemical and abrasion resistance, plus it has low emissions and is non-toxic.

Kerapoxy IG is a variant designed for damp/mould-prone environments, offering enhanced mould resistance for bathrooms and kitchens. For indoor applications with higher moisture exposure, Kerapoxy IG may be preferred. See the Kerapoxy IG product page at https://fepy.com/product/mapei-kerapoxy-ig

Other epoxy options you might explore include: 1) https://fepy.com/product/mapei-kerapoxy-ig, 2) https://fepy.com/product/mapei-kerapoxy-2k, 3) https://fepy.com/product/mapei-kerapoxy-cq

Wear appropriate PPE (gloves, eye protection, and suitable clothing), ensure good ventilation, avoid skin contact, and follow the SDS instructions for handling, storage, and disposal of epoxy products.

Yes, Kerapoxy demonstrates excellent adhesion on both horizontal and vertical surfaces. It can be adjusted during the initial setting period, but once cured it's a strong, durable bond, so adjust carefully and promptly if needed.

During the initial curing phase, some adjustment or removal can be possible. Once fully cured, removal becomes more difficult and may require mechanical methods or specialist products.