Mapei Mapefloor Filler, 0.3Kg, Suitable for Adjusting Texture and Non-Slip Finish of Epoxy Resin Floors

It is formulated to fill cracks, holes and unevenness up to 4 mm, providing a uniform surface for the next layer or finish.

Yes. Once the filler is fully dry, all types of tiles or natural stone can be installed over it on essentially any substrate.

Open the sachet and spread the self-levelling filler evenly over the prepared floor. There’s no need for machines or mixing. Use a trowel to feather edges and obtain a uniform surface.

Drying times depend on temperature, humidity and the thickness laid. Wait until the filler is fully cured before tiling or grouting, as indicated on the product label.

Mapefloor Filler 0.3Kg/Pz is designed for cracks up to 4 mm. For larger defects, repair the substrate first with a suitable larger filler or alternative restoration method.

It is compatible with common substrates and can accommodate all tile types and natural stone once fully cured.

Wear gloves and eye protection. Ensure good ventilation and avoid prolonged skin contact. Clean tools with water while fresh; follow the safety data sheet and product label.

For larger applications, you might compare with Mapefloor Filler 0.6kg and Mapefloor Filler 1kg packs on Fepy: https://fepy.com/product/mapefloor-filler-0-6kg-pz and https://fepy.com/product/mapefloor-filler-1kg-pz

Mapefloor Filler is a fast-setting, self-levelling filler that provides a quick preparation time and a smooth finish, making it well suited for small-to-medium sized areas before tiling or laying natural stone.

Store the filler in a dry place, sealed and protected from moisture. Keep away from extreme temperatures and direct sunlight to maximize shelf life.

Rework is typically possible only during the product’s pot life. Once set, the area will need to be cleaned and reapplied with fresh filler for a proper finish.