Mapei Glossy Wax Finish, 10Kg, Suitable for Polished Stone, Terrazzo and Epoxy Resin Floors

It is formulated to bond well to concrete, plaster, bricks and tiles, and according to its binder properties can also adhere to substrates such as wood, glass and metals when properly prepared. Always prepare the surface and follow priming recommendations for best results.

Pour clean water into a clean container and gradually add Mapelux Lucida 10Kg while mixing to a smooth, workable paste. Mix to a consistent, lump-free texture and apply within the product’s extended working time to adjust finishes as needed.

Mapelux Lucida is built to fill small holes and divots and to provide a smoother finish on surfaces. The achievable thickness and coverage depend on the substrate and application technique; expect a buildable layer that improves surface planarity. For best results, apply in even coats and verify surface flatness before curing.

Yes. It is formulated for high-performance adhesion and durability in both indoor and outdoor environments, helping to seal low spots and create a smooth finish across varying conditions.

Wear appropriate PPE such as gloves, eye protection, and a mask when mixing and applying. Use in well-ventilated areas, avoid prolonged skin exposure, keep away from children, and dispose of waste according to local regulations. Follow the product label for any safety cautions.

If you’re weighing options, you can compare with these readily available alternatives on Fepy: Mapelux Lucida 20Kg (https://fepy.com/product/mapei-mapelux-lucida-20kg) for a larger pack size with similar performance, and Mapelux Lucida 5Kg (https://fepy.com/product/mapei-mapelux-lucida-5kg) for smaller touch-ups or 1st-time trials. Both offer comparable adhesion and filling characteristics in the Mapelux Lucida family.

Use it to render walls and floors, fill minor cracks and holes, and level surface irregularities prior to tiling or painting. It’s suitable for internal plaster repairs, external renders on brick or concrete, and areas where a smooth, durable finish is desired.

Ensure the substrate is clean, free of loose material, and moistened as needed to avoid rapid water loss. Prime porous or reactive surfaces if recommended, mix to a consistent paste, apply in smooth coats, and use trowel or smoothing tools to achieve the desired finish. Allow adequate curing before further finishing or tiling.

Cure times depend on ambient conditions and substrate, but typically you should allow sufficient curing time for the render to gain initial set and strength before applying any tile adhesive or paint over it. Always follow the product label guidance for recoat or tiling windows.

Mapeis Mapelux Lucida 10Kg provides high-performance adhesion, good buildability, and durable surface finish with the ability to fill minor defects. Its indoor/outdoor suitability and extended working time can reduce rework and speed up renovation projects, offering long-term value through a smoother, longer-lasting finish.