Mapei Dry-Shake Surface Hardener, 25Kg, Suitable for Wear-Resistant Industrial and Commercial Concrete Floors - Light Grey

Its cork-reinforced formulation and directional laying give you a controlled finish and enhanced durability. The product is designed to deliver a uniform leveling across large areas while allowing distinct visual effects like rug or limestone finishes.

It bonds well to common substrates such as concrete, ceramic, tiling, marble, terrazzo, and similar prepared surfaces, providing strong adhesion for improved long-term performance.

It is suitable for both indoor and outdoor spaces, including commercial floors, domestic living areas, garages, and garden areas where a resistant, aesthetically pleasing coating is desired.

Mix the powder and water according to the product’s guidance to achieve a smooth, workable consistency. Pour or apply using appropriate tools, then direct the lay to create the desired rug- or limestone-like finish. Allow proper curing between coats and follow surface prep requirements for best results.

The product’s directed laying enables targeted effects, and its cork-reinforced formulation contributes to mechanical strength and durability, helping it resist wear and external agents while maintaining a high-quality look.

Wear appropriate PPE such as gloves, eye protection, and a dust mask as recommended for cementitious products. Work in a well-ventilated area, avoid skin contact, and follow typical cement-based product safety guidelines during mixing and application.

Cure times depend on thickness, temperature, and humidity. For best results, allow sufficient time for initial setting and full cure as indicated in the product data sheet, and avoid heavy traffic until the surface has properly firmed up.

Yes. The product’s directional laying design enables you to create distinctive rug-like or limestone-style textures, giving you a unique finish on large surface areas.

The formulation is intended to work on various substrates and in different environments; ensure compatibility with underfloor heating and any subsequent coatings by following the data sheet recommendations and performing a test area if needed.

Mapetop N AR6 L.Grey combines cork reinforcement with directional laying for unique finishes and enhanced durability, which may differ from other self-leveling toppings that emphasize different curing, texture options, or reinforcement. For alternatives on Fepy, you can explore products like Mapepi Mapetop N AR6 in white and other MAPEI self-leveling toppings such as Planitop series to match your project needs.

Prepare the substrate properly, ensure a clean, damp surface, mix thoroughly to a lump-free consistency, and apply with a method that supports the desired directional lay. Maintain appropriate working time and curing conditions, and consider using tools suitable for large-surface finishing to achieve an even, uniform look.

Yes. You can compare with other self-leveling toppings such as MAPEI Planitop-series products or Mapetop variants in different colors. Examples (on Fepy) include alternative Mapetop formulations and Planitop-based toppings that offer comparable leveling but different finishes or reinforcement. Alternative product pages: https://fepy.com/product/mapei-mapetop-n-ar6-l-white-sacc-25kg and https://fepy.com/product/mapei-planitop-12-self-leveling-topping-25kg

Consider testing a small area with the same substrate and thickness to preview the rug or limestone finish intent, then proceed to scale up to the full surface while maintaining uniform curing and directional laying for consistency.