Mapei Fibre-Reinforced Structural Repair Mortar, 25Kg, Suitable for High-Strength Concrete Restoration and Jacketing

It bonds well to concrete substrates and can be used on both wet and dry surfaces. It provides high-strength bonds on low-absorption substrates and is suitable for repairing a variety of concrete and masonry materials.

Use Planitop 400 ME for repairing concrete and masonry, surfaces and floors, concrete ramps, asphalt surfaces, and as an attachment primer. It’s adaptable for large vertical or horizontal repair areas due to its flexible formulation.

Planitop 400 ME is ready-to-use and designed for easy mixing. For best results, mix with a clean drill and paddle mixer, gradually adding water until you reach a smooth, lump-free consistency. Mix until homogeneous before application.

Apply with a trowel onto clean, sound, and prepared substrates. Use a suitable amount to achieve a uniform layer and press it into the substrate to ensure good bonding. Smooth and finish as needed while the mortar is workable.

It offers high adhesive bonding to concrete, fast and easy application, and a breathable formulation due to the lack of crystalline waterproofing additives. These traits help create a durable repair layer with good substrate compatibility.

Yes. Wear appropriate PPE such as gloves and eye protection, work in a well-ventilated area, and avoid prolonged skin contact. Follow standard cementitious-mortar handling practices and clean tools with water after use.

Store the product in its original packaging in a dry place, away from moisture and direct sunlight. Keep the bag sealed when not in use to preserve workability and performance for future use.

For broader options, you can check related Mapei repair mortars on Fepy.com and compare based on bonding strength, workability, and substrate suitability. For example, you can compare with Mapei Planitop 450 ME and Mapei Planitop 400 by visiting their product pages: https://fepy.com/product/mapei-planitop-450-me-25kg and https://fepy.com/product/mapei-planitop-400-25kg respectively.

Consider bond strength requirements, substrate absorption, surface area to repair, curing conditions, and whether you need a breathable repair mortar. Planitop 450 ME may offer different workability or performance nuances, while Planitop 400 is a closely related option with its own characteristics. Review each product page for specific data.

Yes, it can be used as an attachment primer in repair scenarios. This makes it suitable for preparing surfaces prior to further coatings or finishes, as well as for repairing floors, ramps, and other concrete/masonry elements where a strong initial bond is needed.