Mapei Quartz Aggregate, 0.25mm, 25Kg, Suitable for Anti-Slip Broadcast and Filling of Epoxy and PU Floor Coatings

It can be applied to clean, sound, and stable substrates such as concrete or cement-based screeds, rendered walls, and other properly prepared mineral surfaces. Ensure the substrate is dry and free from dust, oils, or contaminants before installation.

Self-levelling means the adhesive is formulated to flow and settle into low spots, creating a smooth, level bed for tiles. This reduces manual smoothing and helps achieve a uniform tile surface with fewer high and low spots.

It is suitable for bonding ceramic and porcelain tiles, and can also be used with certain natural stones and other tile types as specified by Mapei. It provides a reliable bond for a range of tile installations on interior floors and walls.

Add clean water gradually to the powder in a clean mixing container and mix until you achieve a lump-free, pourable consistency. Apply to the substrate with the appropriate trowel to create a level bed for the tiles, then place the tiles and press firmly to ensure contact.

Setting and curing times depend on ambient conditions like temperature and humidity. Wait until the adhesive has sufficiently set to hold the tiles securely before grouting or subjecting the area to traffic. For your specific conditions, refer to the product guidelines.

Store the product in its original packaging in a dry, shaded place, sealed to protect from moisture. When stored properly, the shelf life remains good for an extended period as long as the packaging is intact.

Wear appropriate PPE such as gloves and eye protection. Avoid prolonged skin contact and inhalation of dust. Work in a well-ventilated area and wash exposed skin with soap and water after handling.

Prepare the substrate properly (clean, sound, and dry), follow recommended mixing ratios, use the correct trowel for your tile size, avoid excess water in the mix, and ensure tiles are kept in place and free from movement during initial set to prevent lippage.

On Fepy you can compare with alternatives such as Mapei Ultralite S1, Mapei Planitex, and Mapei Granirapid. Ultralite S1 is a lightweight, fast-setting option, Planitex is a traditional cement-based adhesive, and Granirapid offers rapid strength development. Choose based on substrate, tile type, open time, and desired curing speed. Product pages: https://fepy.com/product/mapei-ultralite-s1, https://fepy.com/product/mapei-planitex, https://fepy.com/product/mapei-granirapid