Mapei Quartz Aggregate, 0.5mm, 25Kg, Suitable for Textured Resin Floors and Cementitious Screeds

Mapei Quarzo 0.5 Me 25kg is a cementitious concrete mix containing quartz aggregates, supplied in a 25 kg bag. It is designed for use in structural applications and foundations, and it improves scratch and abrasion resistance while providing enhanced durability for outdoor concrete surfaces.

Key specifications include a 25 kg bag size, a blend of cement and quartz aggregates, suitability for structures and foundations, improved scratch and abrasion resistance, and enhanced durability for outdoor use with better waterproofing characteristics.

Use on sound, clean concrete substrates. Remove laitance, loose material, and contaminants. Lightly dampen the surface before application (avoid standing water). Ensure the substrate is stable and free of contaminants that could affect adhesion.

Use a clean mechanical mixer. Slowly add the powder to clean water and mix until you achieve a smooth, homogeneous mixture. Allow a short resting period if needed, then place, level, and finish the concrete as required. Use proper troweling or finishing techniques for the intended surface type.

Protect the surface from rapid loss of moisture during the initial curing period. Maintain adequate moisture with wet curing or curing compounds as recommended for concrete in outdoor conditions to maximize strength and durability.

Wear appropriate PPE such as gloves, eye protection, and a dust mask when handling the powder. Work in well-ventilated areas and follow the Safety Data Sheet guidelines. Store the bag in a dry place and keep it out of reach of children.

On Fepy, you can explore similar quartz-based concrete mixes from Mapei and other manufacturers. For example, comparable options include Mapei Quarzo 0.5 ME Plus 25kg, Mapei Quarzo 0.5 ME 15kg, and Mapei Quarzo 0.4 ME 25kg. Product pages: https://fepy.com/product/mapei-quarzo-0-5-me-plus-25kg, https://fepy.com/product/mapei-quarzo-0-5-me-15kg, https://fepy.com/product/mapei-quarzo-0-4-me-25kg

Ideal for foundations and load-bearing concrete structures, exterior concrete surfaces exposed to wear, and outdoor areas where higher abrasion resistance and durability are required, such as footings, ramps, slabs, and paved surfaces.

Estimate by volume and thickness: determine the desired layer thickness and multiply by surface area to get required volume. The 25 kg bag covers a variable area depending on thickness and surface texture; use standard concrete calculation practices and adjust for substrate porosity and finish. When in doubt, run a small test section to verify coverage and workability.

It combines cement with quartz aggregates to deliver improved scratch and abrasion resistance and outdoor durability in a single 25 kg bag, simplifying material handling and placement for concrete structures and foundations.

Return policies vary by seller and region. If you’re not satisfied with the product for valid reasons, consult the store’s return policy to understand eligibility, timeframes, and required conditions.