Mapei Water-Based Contact Adhesive, 5Kg, Suitable for Skirtings, Profiles and Stair Nosings in PVC and Rubber

It adheres well to most sound, clean substrates such as concrete, cement-based screeds, and prepared masonry. Proper surface preparation and cleaning are key for best results.

Yes. The adhesive is suitable for tile installations on heated floors and is formulated to perform well under those conditions.

Approximately 5 square metres, depending on the substrate texture and the trowel size used.

The open time is about 15 minutes, and the initial cure typically occurs within 1–3 hours, depending on temperature and humidity.

Spread the adhesive with an appropriate notched trowel to create uniform ridges on the substrate, press the tile into place, and adjust within the open time. Avoid slumping, especially on vertical surfaces.

Yes. It is formulated to stay in place during installation, making it suitable for a range of tile sizes and orientations.

It provides excellent waterproof sealing characteristics as part of a tile installation, contributing to overall moisture resistance when used with suitable tiles and grouts.

Yes. Ultrabond Eco Contact 5Kg bonds tiles securely but can be removed if needed, allowing for rework or replacements.

Use in well-ventilated areas, wear gloves and eye protection, and follow general chemical handling guidelines. Store in a cool, dry place away from direct heat or sources of ignition.

Both offer the same performance and open-time characteristics; the difference is primarily pack size. The 6kg variant provides more area coverage per bag and may have different price-per-metre considerations. See https://fepy.com/product/mapei-ultrabond-eco-contact-6kg for details.

The 3kg version uses a smaller bag with proportionally reduced coverage. It shares the same adhesive properties and open time, making it suitable for smaller tiling jobs. See https://fepy.com/product/mapei-ultrabond-eco-contact-3kg for details.