Mapei Penetrating Stone Sealer, 1 Gallon, Used for Invisible Oil and Water Repellent Protection of Natural Stone and Grout

Mapei Ultracare Penetrating Plus is a heavy‑duty, water‑based penetrating sealer for tile and stone. In a 1‑gal container it provides long‑lasting protection against spills and everyday wear while bringing out the natural beauty of the material. It’s designed for both residential and commercial use, and it penetrates the surface to protect without altering color or texture.

It’s suitable for sealing tile and stone surfaces, including ceramic, porcelain, and natural stone, as well as grout in many tile installations. It’s formulated for indoor and outdoor use.

Clean and dry the surface first. Apply evenly using a brush, roller, or spray, working in manageable sections. Do not leave excess wet slurry on the surface. Allow the sealer to penetrate and dry as directed by the product guidelines, then apply a second coat if required for additional protection. Recoat times and application specifics depend on surface porosity and environmental conditions.

One gallon covers up to approximately 150 square feet, depending on the porosity of the surface and the method of application.

Yes. It’s designed to perform well in both indoor and outdoor settings, providing protective sealing for high‑traffic areas such as kitchens, bathrooms, and exterior installations.

No. It is a non‑yellowing, penetrating sealer that won’t alter the color or texture of tile or stone surfaces.

The penetrating formula helps repel liquids, resist stains, and protect against dirt and everyday wear, contributing to easier maintenance and longer‑lasting beauty of the surface.

Use in a well‑ventilated area and wear appropriate PPE (gloves, eye protection). It’s water‑based and generally low odor, but always follow label instructions and ensure proper ventilation during application and curing.

Periodically evaluate the surface; if the surface shows reduced water repellency or increased staining, reapplication may be warranted. Clean the surface before reapplying and follow the same preparation and application steps as the initial sealant.

For similar sealing performance on Fepy, you can compare with other penetrating sealers such as MAPEI Ultracare Penetrating Sealer (1 gal) and Stonetech or Miracle Sealants alternatives. Example pages: https://fepy.com/product/mapei-ultracare-penetrating-sealer-1gal and https://fepy.com/product/stonetech-penetrating-sealer-1gal. These alternatives offer similar penetrating protection and surface compatibility, but exact formulas, drying times, and coverage can vary by brand and product line.

Ideal for kitchens, bathrooms, entryways, and other high‑traffic areas where tile or stone is used. It’s also suitable for outdoor patios and pool surrounds where moisture protection and stain resistance are desired while maintaining the natural appearance of the material.

Mapei Ultracare Penetrating Plus emphasizes deep penetration, non‑yellowing protection, and compatibility with both indoor and outdoor surfaces. Its formulation aims to provide durable protection with minimal maintenance, helping to preserve the natural beauty of the material over time.

Begin with a clean, dry surface and perform a small test area to verify appearance and performance. Apply evenly using your chosen method (brush, roller, or spray), avoid pooling, and allow proper drying before exposing to moisture. If needed, apply a second coat for enhanced protection and follow the specific recoat window as recommended by the product guidelines.