Metabo LSV 5-225 (600136000) 225MM 500W 220 - 240V Comfort Long Neck Sander

Key specs: sanding disc diameter 225 mm, power input 500 W, voltage 220–240 V, no-load speed up to 5,000 RPM, comfort long-neck design, variable speed dial, and a dust extraction port. Model reference: 600136000.

Use the variable speed dial to match the task: lower speeds for delicate finishes, soft woods, or finishing work to reduce heat and smear; higher speeds for heavier material removal or rough stock. Start at a middle setting and adjust as needed to balance material removal with finish quality.

Compatible accessories include 225 mm hook-and-loop sanding discs and discs designed for orbital sanding. You can also connect a dust extraction hose to the built-in port to improve dust control. Replacements pads and discs should be chosen to fit 225 mm size and compatible mounting.

First unplug the tool. Attach a 225 mm sanding disc to the pad using the hook-and-loop system. Connect a dust extractor or bag to the dust port if available. Plug in the sander, select your desired speed, and hold the tool with both hands before starting to work, guiding it evenly across the workpiece.

Wear eye protection, hearing protection and a dust mask or respirator. Use a dust extraction system if possible. Keep hands and loose clothing away from the moving disc, don’t apply excessive pressure, and unplug before changing discs or performing maintenance. Work on a stable surface and ensure the workspace is well-ventilated.

Regularly clean dust from vents and the pad area, inspect the sanding pad for wear or damage, replace worn discs, and check the dust extraction hose for blockages. Store in a dry place and perform periodic checks on cords and connectors.

Use it for furniture finishing, edge and profile sanding, doors and window frames, cabinet work, and curved surfaces where reach is important. The long-neck design helps you access tight areas without overreaching.

For side-by-side comparisons with other long-neck sanders on Fepy, you can browse the category pages to see similar models and specifications. See related options here: https://fepy.com/search?q=long-neck+sander and https://fepy.com/search?q=metabo+long-neck+sander

Yes, the sander has a dust extraction port. Connecting it to a vacuum or dust extractor helps remove dust at the source and keeps the workspace cleaner. For optimal results, use a hose with a compatible diameter and ensure the extractor has adequate airflow.

The sander is designed for sanding wood and other materials, including metals and plastics, with appropriate discs. For wood, start with a coarser grit and progress to finer grits. For metal or plastics, use slower speeds to minimize heat buildup and scorching, and choose discs designed for non-wood materials.

Use fresh, high-quality 225 mm discs, ensure the disc is properly aligned and mounted, and avoid pressing hard into the workpiece. Keep the sander moving in even, overlapping strokes and follow the grain (for wood) to prevent uneven finishes. Use appropriate grit progression from coarse to fine for a smooth surface.