Metabo SE 2500 (620044000) 600W 220 - 240V Drywall Screwdrivers

Power: 600 W; Voltage: 220–240 V; Model: 620044000; Maximum torque: up to 8 Nm; Features: variable speed trigger, quick-release bit holder; Design: slim, ergonomic for comfortable handling.

The variable speed trigger lets you start screws at a controlled, slow speed for precision and pilot holes, then increase speed for faster driving. This helps prevent cam-out, reduces screw head damage, and improves depth control on sheetrock.

It uses a quick-release bit holder that accepts standard screwdriver bits with a 1/4-inch hex shank. To swap bits, press the release collar, remove the current bit, insert the new bit, and release the collar to lock it in place.

Ideal for drywall installation tasks such as driving sheetrock screws into studs and backing, securing drywall sheets, and performing related fastening work in dry interior environments.

Connect to a suitable 220–240 V power supply, ensure the work area is dry and stable, wear eye protection, and keep hands away from the bit and rotating parts. Insert the desired bit, set the appropriate speed with the trigger, and drive screws with steady pressure. Always unplug before changing bits.

Wear appropriate PPE (eye protection, gloves if needed), avoid loose clothing, keep the work area clear, do not force the tool, unplug before bit changes, and use the correct screws and depth to prevent overdriving or damage to the material.

Keep vents clear and the exterior clean, wipe down after use, inspect the power cord for any damage, store in a dry place, and inspect bits and the quick-release mechanism for wear. Replace worn bits to maintain performance.

Compared to similar corded drywall screwdrivers on Fepy, the Metabo SE 2500 emphasizes a robust 600 W motor, up to 8 Nm torque, and ergonomic design with a quick-release bit holder, offering steady power for drywall fastening. For reference, you can check these alternatives on Fepy: Metabo SE 2600 (https://fepy.com/metabo-se-2600-620055000-drywall-screwdriver) and Metabo SE 2300 (https://fepy.com/metabo-se-2300-620043000-drywall-screwdriver).

Yes. The combination of reliable 600 W power, 8 Nm torque, and ergonomic design makes it suitable for both DIY drywall tasks and more demanding professional work, depending on your scope and frequency of use.

Use it in indoor, dry environments appropriate for drywall work. Avoid operation in wet or highly dusty conditions, and do not expose the tool to moisture or dampness. It’s designed for drywall screws; for other materials, ensure the torque and bit selection are appropriate to avoid damage.

While it’s optimized for drywall fastening, you can drive appropriate wood screws within the tool’s torque range. Avoid using screws that exceed the recommended torque or bit size, and use the correct 1/4-inch hex bits and pilot holes as needed to prevent overloading the tool or damaging the material.