Milwaukee Diamond Cutting Blade, 76mm, Thin Kerf Blade for Tile & Masonry

Key specs include a 76 mm diameter and a diamond-coated cutting edge for durable, sharp cuts. It’s designed for accuracy and works with most handheld circular saws that accept a standard blade and arbor configuration.

Ideal for bathroom and kitchen tile installations, countertop stone cutting, wall or floor tiling, and general thin-material stone or ceramic cutting where clean, precise edges are important.

1) Ensure the saw is off and unplugged or the battery is removed. 2) Verify the blade orientation and tighten the arbor nut securely. 3) Insert the blade with the teeth pointing in the correct cutting direction. 4) Start at a low speed and make a test cut, keeping a steady feed. 5) Use appropriate PPE and keep hands clear of the cutting path.

Wear safety glasses or a face shield, hearing protection, protective gloves, and a dust mask or respirator as needed. Also ensure dust extraction or ventilation in the working area and keep guards in place.

For a side-by-side comparison, you can explore similar 76mm diamond blades on Fepy here: https://fepy.com/search?q=76mm+diamond+blade and Milwaukee-specific options here: https://fepy.com/search?q=Milwaukee+76mm+diamond+blade. You can also compare tile-focused 76mm blades here: https://fepy.com/search?q=tile+76mm+diamond+blade.

Many diamond blades are suitable for wet cutting, which helps reduce dust and cools the blade for longer life. Always refer to your saw’s manual to confirm water-feed compatibility and use appropriate precautions when operating a wet-cutting setup.

Diamond blades typically offer longer life and more consistent performance on hard materials like ceramic and stone, due to the durable diamond edge. Lifespan depends on material hardness, cutting technique, and proper cooling. With careful use, you should experience sustained sharpness and fewer edge degrations over time.

Recommended materials include ceramic tile, porcelain tile, granite, marble, and other stone-like substrates. Avoid cutting hardened metals or very thick steel sections, and don’t force the blade—let it do the cutting with a steady, controlled feed.

This blade is designed for handheld circular saws with standard blade arbors. To confirm compatibility, check your saw’s arbor size and blade compatibility in the user manual, and ensure you’re using the correct arbor nut and spacers if required.

Yes. It combines precise cutting performance with durable diamond construction, making it suitable for both DIY renovations and professional stone/tile work. The blade’s durability and accuracy help reduce rework and improve cut quality, contributing to better overall value.