Milwaukee M12 Fuel Percussion Drill Kit, 13mm 12V Combi with 2 x 4.0Ah - Pack of 2 Battery

Core specs include: 12V system, 13mm keyless chuck, percussion (hammer) function for masonry, weight around 1.5 kg, and the kit includes two 4Ah Li-Ion batteries. It’s designed for both DIY projects and light professional work, with a focus on portability and efficiency.

Percussion (hammer) mode delivers rapid short, hammering motions in addition to the rotary motion. This helps the drill bit penetrate hard materials like masonry more efficiently, reducing effort and speeding up projects compared with straight drilling.

To change bits: power off the tool, hold the chuck with one hand, turn the outer sleeve counterclockwise to open the jaws, insert the drill bit shank fully, and tighten by turning the sleeve clockwise until secure. Test by lightly pulling on the bit to ensure it’s firmly seated.

The drill includes a mode control that lets you switch between drill (rotary only) and percussion (hammer) modes. Set it to percussion for masonry tasks and to drill mode for wood or metal. Use the forward/reverse switch to control rotation direction as needed.

Always wear appropriate PPE (eye protection, gloves, hearing protection if needed). Secure your workpiece, keep hands away from the rotating chuck, use sharp bits suited to the material, start at low speed to prevent kickback, and avoid using the tool in wet conditions or on damaged cords/bits.

The M12FPD-402X is designed for both DIY enthusiasts and light professional tasks, offering portability with the benefit of two 4Ah batteries. Its value comes from the combination of a compact form, percussion capability, and Milwaukee’s M12 Fuel efficiency, making it a solid choice in the 12V cordless drill segment on Fepy.

The kit includes the M12FPD-402X drill and two 4Ah Li-Ion batteries. Having two batteries allows you to swap a depleted battery for a charged one without downtime, which is especially useful during longer jobs or while keeping one charging.

Store the tool and batteries in a clean, dry place. Avoid deep discharges; charge batteries before they drop too low. Clean the chuck and grip area after use to prevent debris buildup. Inspect bits for wear and replace as needed, and use the charger and accessories recommended for the M12 system.

For the M12 system, you can look for 12V batteries (e.g., 4Ah packs), chargers, and drill bits compatible with the M12 chuck on Fepy’s Milwaukee 12V accessories pages. This keeps your tool ready for extended use and maintains system compatibility.

If you’re weighing options within the same 12V family, you can consider other M12 percussion drills in the Milwaukee line to compare battery capacity, weight, and available kit contents. For a direct comparison, see the Milwaukee 12V drill family on Fepy and check product pages for differences in battery size, kit contents, and percussion versus non-percussion models. Example alternative (same brand) you can explore: https://fepy.com/product/milwaukee-m12fpd-502x-fuel-13mm-12v-4ah-kit