Milwaukee M12 Fuel Percussion Drill Kit, 13mm 12V Combi with Multi-Head System

The kit includes two rechargeable lithium‑ion batteries (each 2 Ah), providing extended runtime so you can complete tasks without frequent recharging.

The drill features a 13 mm chuck. With percussion (hammer) action, it handles drilling into wood, metal, and masonry when paired with appropriate drill bits.

It uses 12V lithium‑ion batteries, with two 2 Ah batteries included. This setup is designed to offer longer runtime and quicker recharges between tasks.

It's well suited for professional trades and DIY projects that require a compact, ergonomic percussion drill—think installing electrical outlets, assembling cabinetry, drilling into masonry, and light masonry tasks in constrained spaces.

First, insert a suitable bit into the 13 mm chuck and tighten it securely. Choose the drilling or percussion mode as needed, set the appropriate speed, position the drill perpendicular to the work surface, and apply steady pressure without forcing the tool. Always wear eye protection and keep hands clear of the rotating bit.

Charge the batteries fully before first use and between jobs. Avoid deep discharges and exposure to extreme temperatures. Store the batteries in a cool, dry place and recharge as needed. Use the built‑in battery indicators if available and follow the manufacturer’s charging guidelines.

Wear protective eyewear, hearing protection if drilling in noisy environments, and appropriate clothing. Secure the workpiece, hold the drill firmly with both hands, and keep hands away from the bit. Do not operate near water or flammable materials, and dispose of damaged batteries according to local regulations.

In general, 12V Milwaukee drills with Fuel engineering emphasize motor power, cooling, and battery longevity. When comparing, consider chuck size, percussion capability, runtime (battery capacity), weight, and ergonomics to choose the best fit for your tasks. For concrete or masonry work, models with robust percussion action and higher torque may perform better, while lighter tasks benefit from compact designs and lighter weight.

First, ensure the battery is properly seated and has charge. Check the bit is correctly installed and tightened. If the drill still won’t start, try using a different bit, inspect for overheating, and allow the tool to cool. If the issue persists, consult the user manual or get professional service.

Yes, you can use standard 13 mm (1/2 inch) shank drill bits and accessories compatible with a 13 mm chuck. When using accessories, ensure they are rated for the tool’s torque and speed and are appropriate for the material you’re drilling.