Milwaukee 18V Transfer Pump, 3/4" Cordless Pump for Water Transfer

The pump is designed for a variety of liquids, ranging from water to certain chemicals and other common workshop liquids. Always check chemical compatibility for specific liquids before use and avoid pumping flammable, highly corrosive, or abrasive substances unless explicitly rated for them.

Key specs include a 3/4" discharge size and an 18V motor. It is sold as a bare tool, so you will need a compatible Milwaukee M18 battery and charger separately. It’s built for portability and quick tasks where a corded pump isn’t practical.

1) Attach a compatible Milwaukee M18 battery (not included). 2) Connect the intake and outlet hoses/fittings to the pump. 3) Prime if required by your liquid and hose setup. 4) Place the pump on a stable surface and turn it on to begin transferring liquid. Ensure hoses are secured and there is adequate ventilation if pumping indoors.

Wear appropriate PPE (gloves, eye protection). Use in a well-ventilated area. Do not pump flammable or highly reactive liquids unless the pump is rated for them. Keep the unit dry and away from water when changing batteries. Do not operate the pump dry (without liquid) for extended periods. Ensure hoses and fittings are properly attached to prevent leaks.

After use, flush the pump with a compatible liquid to clear residues, drain any remaining liquid, and inspect seals and fittings for wear. Store the tool in a dry place with the battery removed. Periodically check hoses for cracks and ensure the discharge and intake fittings are secure.

On Fepy, you can explore cordless transfer pumps in the category page and Milwaukee’s product lineup for similar models. Compare by discharge size, battery requirements, weight, and compatibility with your existing M18 battery system. See: https://fepy.com/category/cordless-transfer-pumps and https://fepy.com/brand/milwaukee for related options.

Use cases include transferring water or workshop liquids between containers on jobsites, draining small basins or sumps, and moving coolants or other compatible liquids in a workshop or garage setting. Its cordless design is advantageous when outlets are scarce or movement is needed.

Use 3/4" discharge fittings compatible with the pump’s outlet. Attach a suitable intake hose to the inlet and a discharge hose to the outlet, securing both with clamps if needed. Ensure hoses are free of kinks, and keep clamps tight to prevent leaks. Check that fittings are designed for the liquids you’re pumping to avoid damage.

If you’re not satisfied, you can look into the standard return options offered by Fepy for unused or resealed items in original condition within the applicable return window. Check the product page or help center for the specific return window and conditions for bare tools.

As a bare tool, it offers cost savings if you already own compatible M18 batteries and chargers. Professionals benefit from portability and quick-task capability, while DIY users gain a compact solution for occasional pumping. Consider adding a compatible M18 battery and charger if you don’t already own them, plus hoses, clamps, and adapters suited to your typical liquids.

The M18BTP-0 uses Milwaukee M18 batteries and compatible chargers. Since it is a bare tool, you’ll need to supply your own battery and charger. For related accessory options and compatible power options, visit Milwaukee’s store-on-Fepy at https://fepy.com/brand/milwaukee and review compatible M18 batteries/chagers in the same product family category: https://fepy.com/category/cordless-transfer-pumps.