National 20L Eggshell Emulsion - 808 Matt

This emulsion is suitable for a variety of surfaces including concrete, plaster, brickwork, masonry, gypsum board, asbestos, and wood. It is commonly used for decorative applications in residential and commercial buildings.

The paint has a volume solid content of 44 ± 2%, a specific gravity of 1.40 ± 0.05, and a theoretical spreading rate of 9-11 m²/L depending on the surface. The recommended dry film thickness is between 40-50 microns per coat.

At a temperature of 30°C, the paint is touch dry in about 1 hour, can be recoated after 2-4 hours, and reaches full dryness in approximately 24 hours. Drying times may vary based on environmental conditions.

Yes, this emulsion contains anti-fungal and anti-bacterial additives that enhance its resistance to mould and mildew, making it suitable for various environments.

The paint can be applied using a roller, brush, or spray method. For spray applications, an airless spray pressure of 2000-2500 psi with a nozzle size of 0.018” - 0.021” is recommended.

When stored properly in sealed containers, the shelf life of this emulsion is approximately 18 months. Proper storage conditions are essential to maintain its quality over time.

Yes, it can be thinned with water by adding about 5-10% depending on the application method used. This helps in achieving the desired consistency for application.

National Paints Eggshell Emulsion (Matt) is a professional-grade, acrylic copolymer-based water-based paint designed for interior walls and ceilings. It delivers a smooth, low-sheen matte (eggshell) finish that hides minor imperfections, adheres well to common substrates, and cleans easily with mild soap and water. The formulation also features low odor and low VOC, making it suitable for indoor use with proper ventilation.

It is designed primarily for interior walls and ceilings, including plaster, drywall, and concrete substrates. It can also be used on prepared wood trim, doors, and certain metals after proper priming. For bare or highly porous surfaces, a primer is recommended to improve adhesion and finish quality.

This product provides a durable matte (eggshell) finish with easy cleaning. Coverage depends on surface porosity and application method, and is typically listed on the label. Drying times vary with temperature and humidity; surfaces may be touch-dry within a short period and recoating is usually possible after a few hours. The formulation is low odor and low VOC, designed for safer indoor use.

1) Stir well before use. 2) Prepare the surface (clean, repair cracks, sand glossy areas). 3) Prime bare wood/metal if needed. 4) Apply with a brush or roller for walls and ceilings, or a spray for large areas. 5) For best results, apply two coats, allowing adequate drying time between coats. 6) Clean brushes and tools with water after use. Avoid over-thinning unless the label specifies otherwise.

Yes, it can be used on many common interior substrates including wood, drywall/plaster, and compatible metals with proper surface preparation. Bare or porous surfaces typically require a suitable primer to ensure uniform adhesion and finish. For sealing stains or stains from previous finishes, use an appropriate stain-blocking primer first.

The Eggshell Emulsion (Matt) offers a true matte eggshell finish with minimal sheen and excellent hide. If you prefer a slightly shinier surface that’s easier to wipe, you might opt for the Eggshell Emulsion (Satin). Both are designed for interior walls, but the Satin version will reflect more light and may show more surface imperfections. Compare here: https://fepy.com/product/national-eggshell-emulsion-satin

National Premium Eggshell Emulsion (Matte) is a premium variant that typically emphasizes enhanced leveling, durability, and coverage. It is conceptually similar but may offer easier application and slightly improved stain resistance. See: https://fepy.com/product/national-premium-eggshell-emulsion-matte