National Paints Paints Guard Epoxy Flooring Topcoat, 18L, Used for Large Industrial Floor Areas - Flake Grey

Yes, National Guard Epoxy Flooring Topcoat is formulated with excellent resistance to chemicals, acids, and alkalis, making it suitable for areas where exposure to such substances is expected.

This product is designed as a general-purpose flooring topcoat for concrete and cement floors. It can also be used as a finishing coat on steel surfaces for light-duty applications.

The recommended dry film thickness (DFT) is 70–100 microns, while the wet film thickness (WFT) is 175–180 microns.

The theoretical spreading rate is approximately 5.5 m² per litre for coloured finishes and 6 m² per litre for clear finishes.

The product can be applied using airless spray, air spray, or a brush. The mixing ratio is 4:1 by volume (base to hardener), and it should be allowed to mature for 15–20 minutes before application.

At 30°C, it becomes touch-dry in 3–6 hours, can be recoated after a minimum of 10 hours (maximum of 3 days), and fully cures in 7 days.

The product offers a glossy finish in both coloured and clear versions, depending on the shade card selection.

The shelf life is 18 months when stored in original sealed containers under proper storage conditions at 30°C.

Yes, thinning may be required. Use National Epoxy Thinner at a volume of 5–10% for airless spray, 10–15% for air spray, or 10% when using a brush.