National Paints Paints N.C. Putty, 1L, Used for Small Patch Repairs on Wood & Metal - Grey

This putty is primarily used as a levelling filler for wooden furniture and carpentry works. It can also serve as a body filler for automotive surfaces, ensuring a smooth finish after sanding.

For optimal results, the surface must be clean, dry, and free of loose particles. Apply 2-3 coats of putty using a glazing knife, allowing a flash-off time of 5-10 minutes between coats. Sand the surface before applying any topcoat.

At 20°C, the putty becomes touch dry in approximately 30-60 minutes and can be sanded after 30-45 minutes. It is recommended to wait 3-4 hours before applying an additional coat.

National N.C. Putty is available in several colours, including white, grey, red, and brown. This variety allows users to choose a shade that best matches their project needs.

The shelf life of National N.C. Putty is approximately 18 months when stored in original sealed containers under proper conditions, such as below 25°C.

While the putty does not contain dangerous solvents, it is recommended to work in well-ventilated areas and use appropriate safety equipment. In case of contact with eyes or ingestion, seek immediate medical attention.

Tools should be cleaned promptly with NC lacquer thinner or wash thinner to prevent the putty from hardening on them. Proper cleaning ensures that tools remain in good condition for future use.

National N.C. Putty is a versatile filler designed for both wooden and steel surfaces. It fills joints, crevices, cracks and other imperfections, providing a strong bond and moisture seal. It can be used on interior and exterior applications, including walls, doors, windows, cabinets, and even concrete, brick and stone surfaces. A range of colors is available to match most finishes.

Start with a clean, dry surface. Use a putty knife or spreader to scoop a small amount of putty and press it into the defect, filling beyond flush. Smooth the surface with the edge of the knife, remove excess material, and allow it to dry. Once dry, it can be sanded to a smooth, paintable finish and then painted to match surrounding surfaces.

National N.C. Putty is formulated for flexibility and moisture resistance, reducing the likelihood of cracking, shrinking or peeling. It bonds well to wood and steel, provides good sandability and moldability, and seals against moisture, making it suitable for damp areas and a variety of substrates.

Yes. The putty is designed to be sandable and paintable once dry. After sanding to a smooth finish, you can apply any compatible paint or finish. It’s available in a color range to help you match your project more closely.

National N.C. Putty is available in multiple colors to better match common wood and metal finishes. Check the product page for current color options and select the closest match to your project.

Use in a well-ventilated area, avoid prolonged skin contact, and wash hands after use. If the product contains wax/resin-based fillers, follow label safety instructions and keep out of reach of children. For detailed safety information, refer to the product’s Safety Data Sheet on the Fepy page.

The putty can also be used on concrete, brick and stone surfaces, making it a versatile choice for walls, floors or exterior masonry where small imperfections need filling before painting or finishing.