Name: National Paints Synthetic Enamel 18L Silver Grey for Large Floor & Metal Structures
Brand: Fepy
SKU: 13891-DRUM
Price: 297.00 AED
Availability: InStock

Question 1

What finishes and colors are available for this enamel?

Accepted Answer

The enamel is offered in a wide range of colors and finishes. You can select a sheen level (e.g., gloss or semi-gloss) to match your design and performance needs.

Question 2

How does National Paints Synthetic Enamel compare to National Paints Exterior Emulsion?

Accepted Answer

National Paints Exterior Emulsion is typically an alternative exterior finish with a different formulation and appearance. Compare them at: https://fepy.com/product/national-paints-exterior-emulsion

Question 3

How does National Paints Synthetic Enamel compare to National Paints Gloss Enamel?

Accepted Answer

National Paints Gloss Enamel focuses on a higher-gloss finish with similar durability. For a glossy, heavy-duty look, compare both at: https://fepy.com/product/national-paints-gloss-enamel

Question 4

Why might I choose National Paints Synthetic Enamel over other options?

Accepted Answer

It offers a durable, long-lasting finish with good chip and abrasion resistance, plus low VOCs, which can reduce maintenance and touch-ups over time.

Question 5

Is this enamel low in VOC and safer for indoor use?

Accepted Answer

Yes, it is formulated as a low-VOC product to reduce environmental impact and odor during application.

Question 6

How much area does a liter of this enamel cover?

Accepted Answer

Coverage depends on surface porosity and application method. Check the product can for the stated coverage rate per liter for your specific surface.

Question 7

How many coats should I apply and how long does it take to dry between coats?

Accepted Answer

For optimal durability, follow the guidance on the product label regarding the number of coats and drying times. Drying can be affected by temperature and humidity, so adjust accordingly.

Question 8

Do I need a primer before applying this enamel?

Accepted Answer

Priming is advised on bare wood, metal, or highly porous surfaces. On previously painted surfaces, inspect adhesion, lightly sand, clean, and then apply the enamel.

Question 9

How should I apply National Paints Synthetic Enamel for best results?

Accepted Answer

Ensure the surface is clean, dry, and primed where required. Stir thoroughly before use, apply with your preferred method (brush, roller, or spray), and avoid heavy coats. Allow adequate drying time between coats as indicated on the product label.

Question 10

How does this enamel perform against moisture, UV exposure, and weathering?

Accepted Answer

The formulation delivers good resistance to moisture, mildew, UV fading, and general weathering, making it a solid choice for both indoor and outdoor applications.

Question 11

What surfaces can this enamel be applied to?

Accepted Answer

It is suitable for wood, metal, and concrete surfaces both indoors and outdoors.

Question 12

Which surfaces can I apply National Paints Synthetic Enamel to?

Accepted Answer

It is suitable for interior and exterior walls, as well as wood, metal, masonry, and concrete surfaces, provided the surface is clean, dry, and properly prepared.

Question 13

What is National Paints Synthetic Enamel and what surfaces is it best for?

Accepted Answer

National Paints Synthetic Enamel is a high-performance finish designed for interior and exterior surfaces. It provides a durable, chip- and abrasion-resistant coating with low VOC, suitable for high-traffic and high-moisture areas.

Question 14

Is this enamel easy to clean after application?

Accepted Answer

Yes, its smooth surface makes cleaning simple while maintaining its glossy finish.

Question 15

Does this product dry quickly?

Accepted Answer

Yes, it features a fast-drying formula that allows efficient application.

National Paints Synthetic Enamel 18L Silver Grey for Large Floor & Metal Structures

Features & Benefits

Specification

Attachments

Frequently Asked Questions