National Paints 18L Synthetic Enamel 385 - Tango

This synthetic enamel offers superior coverage, excellent gloss finish, and anti-fungal properties that protect against mould. It also has good abrasion resistance and hardness, enhancing its durability.

The touch dry time for National Paints Synthetic Enamel is approximately 2-6 hours, depending on environmental conditions. Full curing may take longer, so it's advisable to avoid heavy contact during this period.

Yes, it is suitable for a variety of surfaces including wood, metal, and masonry. This versatility makes it an ideal choice for both decorative and protective applications.

The paint can be applied using brushes, rollers, or spray equipment. For best results, ensure the surface is clean and properly prepared before application.

While it provides excellent protection and durability, National Paints Synthetic Enamel contains solvents typical of oil-based paints. Proper ventilation during application is recommended to minimize inhalation of fumes.

National Paints Synthetic Enamel 385 Tango is available in various colours to suit different aesthetic preferences. Specific color options can be found in the product catalog or by consulting with a local distributor.

Leftover paint should be stored in a cool, dry place with the lid tightly sealed to prevent drying out. Ensure it is kept out of reach of children and pets for safety.

National Paints Synthetic Enamel is a high-performance finish designed for interior and exterior surfaces. It provides a durable, chip- and abrasion-resistant coating with low VOC, suitable for high-traffic and high-moisture areas.

It is suitable for interior and exterior walls, as well as wood, metal, masonry, and concrete surfaces, provided the surface is clean, dry, and properly prepared.

The enamel is offered in a wide range of colors and finishes. You can select a sheen level (e.g., gloss or semi-gloss) to match your design and performance needs.

The formulation delivers good resistance to moisture, mildew, UV fading, and general weathering, making it a solid choice for both indoor and outdoor applications.

Ensure the surface is clean, dry, and primed where required. Stir thoroughly before use, apply with your preferred method (brush, roller, or spray), and avoid heavy coats. Allow adequate drying time between coats as indicated on the product label.

Priming is advised on bare wood, metal, or highly porous surfaces. On previously painted surfaces, inspect adhesion, lightly sand, clean, and then apply the enamel.

For optimal durability, follow the guidance on the product label regarding the number of coats and drying times. Drying can be affected by temperature and humidity, so adjust accordingly.