National Paints Acrylic Road Marking, 18L, Gives Smooth Finish & Bright Texture – Black

It can be applied to concrete, asphalt, tarmac, and other paved surfaces. For best results, ensure the surface is clean, dry, and free of oil, dirt, and loose material before coating.

Yes. The paint is highly visible and reflective when illuminated by headlights at night, enhancing safety for lane demarcation, hazard warnings, and pedestrian walkways.

The coating dries quickly and can typically be recoated once the surface is dry to the touch. In normal conditions, a recoat window of around 1–2 hours is common, but allow longer in cooler or more humid conditions and avoid applying in rain or on wet surfaces.

Coverage depends on surface porosity and application method (brush vs. spray). As a rough guide, plan for approximately 60–100 m² per 18 L for a single coat on average surfaces; two coats will reduce total coverage per coat. Always test a small area first to confirm coverage on your surface.

Preparation is key: clean and dry the surface, remove oils or loose material. For application, use a compatible road-marking sprayer or a brush/roller for edges. Apply in smooth, even coats, maintaining a consistent thickness. After marking, allow adequate drying time before opening to traffic.

The product is manufactured and tested in accordance with BS/EN norms for durability and performance. It is water-based with low VOC content, and users should wear appropriate PPE (gloves, eye protection) and ensure ventilation during application. Dispose of waste materials according to local regulations.

Store in a cool, dry place away from direct sunlight and heat sources. Keep containers tightly closed when not in use. Shelf life is typically up to 12 months if unopened and stored properly; always check the label for the specific expiry date.

Fepy offers similar black acrylic road marking paints from other reputable brands. For direct comparisons, you can review Sika Acrylic Road Marking Paint 20L Black and other National Paints black road-marking options. See the alternatives here: https://fepy.com/products/sika-acrylic-road-marking-paint-20l-black and https://fepy.com/products/national-paints-acrylic-road-marking-18l-black

Use cases include lane demarcation on roads and car parks, hazard and boundary markings, pedestrian walkways, safety zones in industrial settings, and marking access routes where high visibility is required.

The paint is designed for outdoor use on roads and exterior surfaces, but it can be used for large indoor marking projects (like warehouses or loading bays) where durable, high-visibility markings are required, provided the surface is suitable and proper ventilation is ensured.

Its 18L capacity covers a large area, it dries quickly reducing downtime, and it provides long-lasting color retention with strong resistance to weather, impact, and abrasion. The fast recoat capability allows projects to be completed with minimal disruption, and its BS/EN testing supports reliable performance for safety-critical markings.