National Paints 1L Lacquer Thinner

It is suitable for thinning lacquer, enamel, urethane and epoxy coatings.

Yes, it is described as safe to use indoors with a low odor and non-flammable characteristics. Nevertheless, ensure good ventilation, use appropriate PPE, and keep away from heat or sparks.

It can be used to prepare and clean surfaces such as metal, wood, plastic, and glass before painting.

Use the thinner to dissolve grease, oil, wax and residue. Wipe or wipe-and-dry the surface with a cloth dampened with the thinner, then allow the surface to dry before applying paint.

Follow the product label directions. Start by adding a small amount to the finish and test the flow and film. For different application methods (brush, roller, spray), adjust until you achieve the desired viscosity while avoiding over-thinning.

The thinner is non-flammable with a low odor, but always use in a well-ventilated area. Wear gloves and eye protection, keep away from heat sources, and store in a cool, tightly closed container in a ventilated location.

National Paints Lacquer Thinner is designed for thinning lacquer, enamel, urethane and epoxy with indoor-suitable low-odor performance. On Fepy, you can compare with similar products to choose based on odor, flash point, compatibility with your finish, and packaging size. For reference, see similar options on Fepy: 1) Universal Lacquer Thinner (https://fepy.com/product/universal-lacquer-thinner-1l) 2) Xylene-Based Lacquer Reducer (https://fepy.com/product/xylene-based-lacquer-reducer-1l) 3) Aliphatic Hydrocarbon Thinner (https://fepy.com/product/aliphatic-hydrocarbon-lacquer-thinner-1l).

The product page typically lists available packaging sizes. Choose a size that matches your project scale and storage convenience, ensuring you keep the container tightly closed between uses.

If you’re unsure, check Fepy’s return policy on the product page or in your order details. Ensure the container is unopened and packaging is intact to qualify for a return or exchange within the stated timeframe.

Dispose of leftover thinner and empty containers in accordance with local hazardous waste regulations. Do not pour leftover thinner down the drain. Recycle the container if your local facility accepts empty solvent containers.

Do not mix with incompatible solvents or finishes unless explicitly recommended by the finish manufacturer. Always follow the finish’s guidelines and test compatibility on a small area before wide use.