National Paints 3.6L Paint Remover

National Paints Paint Remover is a fluffy, thick, jelly-like stripping compound based on non-flammable solvents that soften, dissolve, and remove dry old paint layers. It can effectively remove air-drying alkyd paints, stoving paints, water-based paints, two-component polyurethane, epoxy, and other coatings.

National Paints Paint Remover has a transparent, fluffy, thick liquid appearance. The spreading rate depends on various factors like surface nature, paint or varnish film thickness, and the quality and type of the paint film.

To apply National Paints Paint Remover, apply a thick coat on the old paint film and allow it to react for 5-10 minutes. During this time, the paint film will soften. Then, the softened film and the excess chemicals can be easily removed with a knife or scraper. The process may need to be repeated if the film is very thick or hard.

When using National Paints Paint Remover, it is important to wear hand gloves as the product should not come in contact with the skin. In case of accidental skin contact, the affected area should be washed with fresh water.

National Paints Paint Remover has a shelf life of 18 months in the original sealed containers, with proper storage conditions.

No, National Paints Paint Remover is non-flammable.

This product is designed to effectively strip paint, varnish, and coatings from various surfaces, including wood, metal, and concrete, making it ideal for renovation and restoration projects.

It contains strong chemical solvents that loosen paint layers quickly and efficiently. It is formulated for industrial-grade performance and can handle multiple layers of paint.

Apply a thick coat of the remover with a brush or spatula, let it sit for 10-15 minutes (or as per instructions), and then scrape off the loosened paint using a scraper or steel wool.

Use in a well-ventilated area or outdoors to avoid inhaling fumes. Wear chemical-resistant gloves, goggles, and protective clothing to prevent skin and eye contact with the product.

Yes, it contains flammable solvents. Avoid using it near open flames, sparks, or high heat sources to prevent fire hazards.

It is suitable for most surfaces but should not be used on aluminium or zinc due to its corrosive properties. Always test on a small area before full application.

Store in a cool, dry place away from direct sunlight, heat sources, and open flames. Keep the container tightly closed when not in use.

Follow local environmental regulations for hazardous waste disposal. Do not pour into drains or water systems; consult your local waste management authority for proper disposal methods.