National Paints 890 900ml Synthetic Enamel - Black

It is suitable for interior and exterior walls, as well as wood, metal, masonry, and concrete surfaces, provided the surface is clean, dry, and properly prepared.

The enamel is offered in a wide range of colors and finishes. You can select a sheen level (e.g., gloss or semi-gloss) to match your design and performance needs.

The formulation delivers good resistance to moisture, mildew, UV fading, and general weathering, making it a solid choice for both indoor and outdoor applications.

Ensure the surface is clean, dry, and primed where required. Stir thoroughly before use, apply with your preferred method (brush, roller, or spray), and avoid heavy coats. Allow adequate drying time between coats as indicated on the product label.

Priming is advised on bare wood, metal, or highly porous surfaces. On previously painted surfaces, inspect adhesion, lightly sand, clean, and then apply the enamel.

For optimal durability, follow the guidance on the product label regarding the number of coats and drying times. Drying can be affected by temperature and humidity, so adjust accordingly.

Coverage depends on surface porosity and application method. Check the product can for the stated coverage rate per liter for your specific surface.

Yes, it is formulated as a low-VOC product to reduce environmental impact and odor during application.

It offers a durable, long-lasting finish with good chip and abrasion resistance, plus low VOCs, which can reduce maintenance and touch-ups over time.

National Paints Gloss Enamel focuses on a higher-gloss finish with similar durability. For a glossy, heavy-duty look, compare both at: https://fepy.com/product/national-paints-gloss-enamel

National Paints Exterior Emulsion is typically an alternative exterior finish with a different formulation and appearance. Compare them at: https://fepy.com/product/national-paints-exterior-emulsion