National Paints Plastic Emulsion, 3.6L, Used for Strong Coral Accent Walls - Tile Coral

This is an economical water-based plastic emulsion designed for both interior and exterior surfaces. It delivers a smooth, washable finish with a Tile Coral shade and is optimized for durable color retention on walls, ceilings, and masonry surfaces.

Volume: 3.6 liters. Coverage: up to about 40 m2 per coat (varies with surface texture and application method). Finish: Tile Coral. Drying time: touch dry in roughly 30–60 minutes; recoat time typically 2–4 hours. It’s washable, UV-resistant, mildew/mildew-resistant, and suitable for both interior and exterior applications.

Suitable for primed or previously painted interior and exterior surfaces such as walls, ceilings, plaster, masonry, and light wooden or MDF surfaces. For very porous or problematic surfaces, a compatible primer may improve adhesion and finish.

Ensure the surface is clean, dry, and free of loose material. Repair cracks or defects, sand rough spots, and remove dust. If switching from a dark or highly different color, consider a primer or sealer to achieve even coverage and color fidelity.

Typically two coats are recommended for even color and durability. In cases of strong color changes or highly absorbent surfaces, a third coat may be considered for optimal finish.

Stir the Emulsion thoroughly before use. Apply in thin, even coats with a brush, roller, or spray. Maintain a wet edge to avoid lap marks, and avoid heavy coats that could lead to sagging or drips. Allow each coat to dry fully before applying the next one.

Yes. It is a water-based emulsion with relatively low odor and quick drying. It provides damp resistance and is suitable for bathrooms, kitchens, or other moisture-prone spaces when used as directed. Ensure good ventilation during application.

Compared with larger-volume plastic emulsions, this 3.6L option offers an economical solution with a durable, washable finish and the Tile Coral shade, ideal for smaller projects or color-matching. For larger areas, you might consider higher-volume emulsions that provide similar finish and washability—see the National Paints 5L White and comparable alternatives on Fepy for per-liter cost and color options.

If you’re weighing options, you can compare with: National Paints Plastic Emulsion 5L White (URL: https://fepy.com/product/national-paints-plastic-emulsion-5l-white) and Dulux EasyCare Plastic Emulsion 4L (URL: https://fepy.com/product/dulux-easycare-emulsion-4l). These provide similar washability and interior/exterior suitability, with different volumes and color selections.

Store in a cool, dry, well-ventilated area away from direct sunlight. Keep the container tightly closed when not in use. While exact shelf life can vary, properly stored emulsion typically remains usable for an extended period; if the consistency or color changes noticeably, discard and replace.

Calculate total paintable area by measuring length × height for each wall (ignore windows and doors for rough estimates). Multiply by the number of coats (usually 2). Use the product’s coverage guidance (about 40 m2 per 3.6 L per coat) and factor in surface texture and porosity. It’s often prudent to buy a little extra for touch-ups and color matching.