National 3.6L Rust Remover Converter - Transparent

Key features include its ability to penetrate rust quickly and transform it into a protective layer, drying clear for easy application under paint or other coatings.

The product can be applied to various metal surfaces, including steel and iron, and is especially effective on heavily rusted areas.

Application is done using a brush, roller, or spray, with the surface cleaned first before applying the remover and allowing it to dry completely before painting or sealing.

The drying time typically ranges from 1 to 2 hours for touch drying and up to 24 hours for full curing.

It is safe for indoor use with proper ventilation during application to minimize fumes.

Protective gloves and goggles should be worn, and a well-ventilated area is advised to avoid inhalation of fumes.

The product serves as an excellent primer, enhancing adhesion for subsequent paint layers, ensuring durability and finish quality.

It removes rust chemically from iron and steel surfaces, forming a light phosphate coating suitable for priming or painting.

Use hand gloves and eye protection as the product contains acids and strong chemicals. In case of skin contact, wash with fresh water immediately.

Apply using a brush, dipping, or cotton cloth. Leave it on the rusted area for 15 minutes; reapply if necessary. For marginal rust areas, dilute with water in a 1:1 ratio.

Yes, although it is ready to use, it can be diluted with water for less severe rusted areas.

The product has a shelf life of 18 months when stored at 30°C in its original sealed container under proper conditions.

It appears as a clear liquid with a mild odour and has a specific gravity of 1.37 ± 0.05 kg/L.

It is designed specifically for iron/steel surfaces and may not be suitable for other materials without testing.