Features
|
|
Brands : | National Paints |
Quantity Unit : | 1 Piece |
Item Type : | Spray plaster |
Application Type : | Interior & Exterior |
About this item
National Spray Plaster Fine is a prepared mixed plaster based on acrylic copolymer binder with unique fillers. The Plaster Spray can be utilized for a smooth levelling coat over spray plaster coarse as well as a medium, creating a thin layer. Spray Plaster is effectively sandable to bring a smooth finish. National Paints contains anti-bacterial and anti-fungal additives.
RECOMMENDED USES
National Spray Plaster Fine is advised for smoothening and levelling the indoor walls and ceilings for the ensuing final coat system to obtain the greatest performance. The Spray Plaster can be applied as an undercoat on places like the ground basement, ground floor or any upper deck of vehicle parking, concrete roofs and ceilings. The National Spray Plaster Fine can also utilize to create decorative texture on ceilings and can be over coated with the recommended topcoat.
SURFACE PREPARATION
Before applying the National Spray Plaster Fine, ensure that the surface is clean and free from grease or oil, dust particles, etc. The National Spray Plaster is an environmentally friendly product. The application of spray should be easy with the recommended methods.
ADVANTAGES
National Spray is ready to use plaster for surfaces and is an excellent adhesive. It delivers a smooth finish and is effectively sandable. The Spray Plaster is white and helps create a levelled smooth base for topcoats. It contains no chloride admixtures and does not flake off.
SPECIFICATIONS
APPEARANCE | Thick, non - flowing & viscous paste |
COLOUR, DRY FILM | White |
FINISH, DRY FILM | Smooth, Sandable |
VOLUME SOLIDS | 58 ± 2% (ASTM D2697) |
SPECIFIC GRAVITY | 1.65 ± 0.05 |
THEORETICAL SPREADING | 2.84 kg /m2 /mm (depending on the surface) |
RECOMMENDED DFT (DRY FILM) | 500 - 1000 microns /coat |
RECOMMENDED WFT (WET FILM) | 862 -1724 microns /coat |
FLASHPOINT | Water-Based |
TOUCH DRY | 45 - 60 min. |
HARD DRY | 24 hrs. |
DRY TO OVERCOAT COAT | 6 - 8 hrs. |
APPLICATION TOOLS | Putty knife, scraper, etc. Spray equipment (For Texture) |
CLEANING/ THINNING | Water |
THINNER (VOLUME) | Ready to use (if required maximum up to 5%) |
Brands | National Paints |
---|---|
Quantity Unit | 1 Piece |
Unit | Individual |
Item Type | Spray plaster |
Compatibility | Ceiling, Flooring |
Application Type | Interior & Exterior |
Arrives: Sep 27
In stock