Oatey Glue UPVC 473ML

It bonds UPVC and CPVC pipes and fittings, making it suitable for irrigation systems and other PVC piping applications.

Cut and deburr the pipe, dry-fit to ensure proper alignment, and clean the pipe ends and fittings. Apply a thin, even layer of adhesive to the pipe end (and/or the fitting), insert the pipe into the fitting with a slight twist to spread the adhesive, and hold briefly to set. Wipe away excess glue and allow the joint to cure before pressurizing the system according to typical adhesive curing guidelines.

Yes. The low-odor, non-toxic formulation is suitable for both indoor and outdoor applications, including irrigation and plumbing projects.

This Oatey formula emphasizes strong tack and grab without expansion, dries crystal clear to prevent discoloration, is non-toxic and low-odor, and provides a waterproof bond suitable for PVC piping joints.

The glue has a low odor and is non-toxic, but use in a well-ventilated area and away from heat sources. Store the container capped tightly in a cool, dry place away from direct heat or open flames.

Keep the container sealed tightly when not in use and store in a cool, dry place away from heat sources and direct sunlight to maintain adhesive performance.

Two commonly browsed alternatives on Fepy.com are: - Oatey PVC Cement Clear 473ml: https://fepy.com/product/oatey-pvc-cement-clear-473ml - Oatey CPVC Cement 473ml: https://fepy.com/product/oatey-cpvc-cement-473ml These provide similar bonding for PVC/CPVC piping with different finishes or formulations, depending on the project needs.

Ideal for joining and sealing UPVC irrigation pipes and fittings where a waterproof, crystal-clear bond is desired, and where indoor or outdoor exposure is expected.

If a joint leaks, allow the glue to fully cure, then re-cut any damaged section if needed, clean the surfaces again, and reapply a fresh coat of adhesive to the pipe and fitting before re-assembling. Ensure proper alignment and a proper seal during reinstallation.

This 473ml container offers a cost-per-application advantage for multiple joints and projects. Its strong bond, crystal-clear finish, low odor, and indoor/outdoor suitability contribute to long-term reliability and potentially lower maintenance costs compared to cheaper alternatives that may require more frequent rework.