Olfa Utility Spare Blade For Rotary Cutter, 45mm – Single Blade

The blade is optimized for smooth cutting of fabrics, paper, and thin plastics. It delivers sharp, consistent cuts with minimal effort on typical craft and sewing applications.

The blade is manufactured for high sharpness to ensure clean edges with reduced drag. It maintains its edge well under regular cutting tasks, but actual longevity depends on material softness, cutting pressure, and frequency of use.

1) Make sure the cutter is powered off and the blade guard is closed. 2) Remove the old blade according to your cutter’s manual. 3) Align the new OL-RB45-1 blade with the cutter’s blade holder, ensuring the sharp edge faces the direction of cut. 4) Reassemble and test on scrap material to confirm smooth operation. Handle blades with care and wear cut-resistant gloves if available.

This blade is specifically designed for OLFA rotary cutters that accept 45mm blades, including the RTY-2/G family. For compatibility with other models, check the cutter’s documentation or look for 45mm OLFA spare blades marked as RTY-2/G-compatible on Fepy.

Ideal for crafting, quilting, fabric trimming, scrapbooking, pattern cutting, and any project needing precise, smooth cuts on fabric, paper, or thin plastic. It’s particularly useful when you require clean edges and steady performance over multiple passes.

Always keep the blade covered when not in use. Use the blade guard on your cutter and wear protective gloves if handling raw blades. Cut on a stable surface, apply steady, even pressure, and keep fingers away from the blade path. Store blades in a safe, dry place away from children.

If cutting becomes difficult or binding occurs, replace the blade with a fresh OL-RB45-1 blade. Ensure the blade is properly seated in the holder and that you’re not forcing the cut. For fabric, try using light, even pressure and a steady motion.

Keep blades in their protective packaging or a blade case to prevent nicks and corrosion. Store in a dry place away from moisture and direct heat. Avoid touching the sharp edge and handle blades by the sides only.

Yes, Fepy offers value options such as multi-blade packs which can be more cost-effective for frequent users. Example: OLFA 45mm spare blade packs can be found here: https://fepy.com/product/olfa-45mm-rotary-spare-blade-pack-5 . Individual blades are available here: https://fepy.com/product/olfa-45mm-rotary-spare-blade-rt2g-single

Compared to other 45mm spare blades on Fepy, the OL-RB45-1 is designed for solid, long-lasting sharpness with compatibility specifically noted for RTY-2/G cutters. Alternatives on Fepy may offer variations in edge longevity, coating, or packaging. For direct comparisons, you can review the Olfa 45mm spare blade options at these representative product pages: https://fepy.com/product/olfa-45mm-rotary-spare-blade-rt2g-single and https://fepy.com/product/olfa-45mm-rotary-spare-blade-pack-5