Pegler 2" Brass Foot Valve

Specifications: size is 2"; maximum operating pressure up to 10 bar; maximum operating temperature up to 95°C; material is brass for durability and corrosion resistance. It’s designed for reliability in hot and cold water conditions.

It is suitable for hot and cold water and can be used in various fluid systems that are compatible with brass. Avoid highly aggressive or corrosive chemicals not intended for brass and ensure the liquid’s pH and additives won’t corrode brass components.

Typical uses include protecting pump priming in domestic water supplies, heating and boiler feed lines, irrigation suction setups, and other suction-side applications where backflow prevention is needed.

Shut off water supply, prepare the suction line with compatible 2" fittings, orient the valve so the flow direction is toward the pump, and tighten connections securely. Ensure any required screens or strainers are in place upstream, then test for leaks and proper operation while the system is pressurized at a low level before full use.

Some foot valves include an internal screen to prevent debris ingress. If your application is prone to sediment, consider using a compatible external screen or strainer upstream and inspect/clean it regularly to maintain prime and flow.

key considerations include operating within the 10 bar pressure limit and up to 95°C temperature, ensuring material compatibility with the liquid, and installing per standard plumbing practices. Use only with fluids suitable for brass components and have a qualified professional perform installations in complex systems.

Larger sizes (like 2") generally provide higher flow capacity and are used for bigger-diameter piping or higher-volume systems, while smaller sizes (such as 1-1/2") are for lower flow applications. For higher flow scenarios, consider the 2-1/2" variant if your piping matches that size. See the 1-1/2" option for a lower-flow setup and the 2-1/2" option for higher capacity; examples: https://fepy.com/product/pegler-1-1-2-inch-brass-foot-valve and https://fepy.com/product/pegler-2-1-2-inch-brass-foot-valve

Periodically inspect for leaks, verify the valve is primed and not air-bound, and clean any debris from upstream screens or strainers. If flow is restricted or backflow protection feels compromised, inspect the seat and valve internals and replace components as needed.

Consider long-term durability, corrosion resistance of brass, operating limits (pressure and temperature), compatibility with your liquids, and the Pegler brand’s reputation for quality. A valve with a solid build and reliable backflow protection can reduce maintenance and downtime in the system.

As a foot valve, it provides backflow prevention on the suction side of a pump, maintaining prime and preventing reverse flow when the pump stops. Its effectiveness depends on proper installation, absence of debris, and staying within recommended pressure and temperature ranges. It is not a full flow-control device or a chemical isolation valve.

For best results, pair with compatible 2" piping, strainers or screens if needed, and appropriate adapters or unions to fit your system. You can also explore additional Pegler fittings and 2" connectors on Fepy to complete your installation.

If you’re evaluating alternatives, you can check the Pegler 2" Brass Foot Valve with Screen for potential debris protection here: https://fepy.com/product/pegler-2-inch-brass-foot-valve-with-screen