32mm x 1" PPR Female Socket

Ensure correct sizing and preparation (clean ends, deburred edges), use the appropriate bonding method as per system requirements, follow proper installation steps, and perform a leak test after installation. Regular inspection and maintenance help detect issues early and extend joint life.

PPR heat-fusion joints are generally designed for permanent joints and are not intended for reuse. If a joint leaks or fails, replace the fitting and pipe section with a new PPR socket connection and re-test.

PPR fittings are commonly used for potable water when they meet local standards and certifications. Check the product’s specifications and certifications on Fepy to confirm suitability for potable water in your region.

Measure the outside diameter of your pipe and match it to the socket size on the fitting. Refer to the size chart or product page on Fepy to confirm compatibility, and ensure you’re using components with the same measurement system and material (PPR) for a proper fit.

If you’re exploring options on Fepy, you might consider these alternatives: - PPR Male Socket Pipe Fitting: https://www.fepy.com/product/ppr-male-socket-pipe-fitting - PPR Tee Pipe Fitting: https://www.fepy.com/product/ppr-tee-pipe-fitting - PPR Coupling: https://www.fepy.com/product/ppr-coupling-pipe-fitting

Wear appropriate PPE (gloves and eye protection), depressurize and/or drain the system before installation, use proper tools, handle hot tools with care, and follow local codes and the supplier’s safety guidelines. Avoid prolonged sun exposure on unprotected fittings and store away from direct heat sources.

It is suitable for industrial, commercial, and residential piping projects that require reliable PPR connections, including hot and cold water distribution, heating systems, and general plumbing networks.

Basic steps: depressurize the system, cut the pipe square and deburr the edge, dry-fit to confirm alignment, and then use the recommended bonding method (heat fusion or solvent cement) for your system. Insert the pipe into the socket and hold until the joint sets or cools, then test for leaks. Always follow local plumbing codes and the manufacturer’s installation guidelines.

Available sizes vary by product. Please check the specific product page on Fepy for the size options and corresponding pipe compatibility. Size availability and units (metric) are listed there.

It combines high impact strength with high temperature resistance and excellent corrosion and pressure resistance. The fit has a smooth surface finish to ease installation and is designed to form a reliable seal for long-lasting connections.

A PPR female socket pipe fitting is a socket-style connector made from polypropylene random copolymer (PPR) used to join PPR pipes. The female socket receives the pipe end, and when installed with the recommended bonding method (heat fusion or solvent-based bonding as appropriate), it creates a secure, leak‑proof joint suitable for hot and cold water systems in industrial, commercial, or residential piping networks.

Ensure correct sizing and preparation (clean ends, deburred edges), use the appropriate bonding method as per system requirements, follow proper installation steps, and perform a leak test after installation. Regular inspection and maintenance help detect issues early and extend joint life.

PPR heat-fusion joints are generally designed for permanent joints and are not intended for reuse. If a joint leaks or fails, replace the fitting and pipe section with a new PPR socket connection and re-test.

PPR fittings are commonly used for potable water when they meet local standards and certifications. Check the product’s specifications and certifications on Fepy to confirm suitability for potable water in your region.