Threaded 32mm Poly Male Adaptor

Durable construction built from high-quality materials, corrosion-resistant and chemical-resistant for versatility. It connects a 32mm outside-diameter PE pipe to a 1-inch female threaded pipe fitting, supports easy installation with standard tools, and is designed to be leak-proof under typical operating pressures.

Ideal for plumbing, irrigation, and general fluid-transfer systems that use 32mm PE pipe and require a 1-inch female threaded connection. Suitable for both professional installations and DIY projects where a reliable PE-to-threaded transition is needed.

Steps: (1) Cut and clean the 32mm PE pipe to ensure a clean, square end. (2) Insert the 32mm PE pipe into the adaptor’s PE end, ensuring a secure seating. (3) Align the 1-inch female threaded side with the mating threaded component, apply thread sealant if required, and tighten with a wrench until snug. (4) Check for leaks and re-tighten if necessary after system pressurization.

The adaptor is designed for 32mm OD PE pipe on the PE side and a 1-inch female threaded connection on the opposite side. It provides a straightforward transition from PE piping to standard threaded fittings.

The design emphasizes a tight seal at the threaded end and a secure seating for the PE pipe. Use of appropriate thread sealant where required and proper torque during installation helps maintain a leak-proof connection under typical pressure conditions.

Constructed from durable polymer materials with corrosion resistance. The combination provides long-lasting performance in varied environments and compatibility with a range of chemicals and fluids.

If you’re evaluating options, consider these similar Fepy products to compare PE-to-thread connections: 1) 32mm PE Pipe to 1in Female Thread Adaptor — https://fepy.com/product/32mm-pe-pipe-to-1in-female-thread-adaptor 2) 32mm PE Pipe to 1in Female BSP Thread Adaptor — https://fepy.com/product/32mm-pe-pipe-to-1in-female-bsp-thread-adaptor 3) 32mm Push-Fit to 1in Thread Adaptor — https://fepy.com/product/32mm-push-fit-to-1in-thread-adaptor

Use it to connect PE piping in irrigation lines to valves, filters, or pumps that have 1-inch female threaded ports. It’s handy for retrofits, repairs, or coalescing different pipe standards within a single system—reducing leakage risk and simplifying assembly.

Yes. Confirm chemical compatibility for the fluids in your system and ensure the operating pressure is within the adaptor’s tolerance. While the adaptor is corrosion- and chemical-resistant, always verify compatibility with your specific fluids and temperatures before full‑time use.

It offers a reliable PE-to-threaded connection at a competitive price, combines durable materials with ease of installation, and reduces potential leak points—delivering dependable performance for both DIY projects and professional installations.

Consider pipe compatibility (32mm PE vs other sizes), the thread type (1in female in this case), installation simplicity, leak-resistance features, and the price-to-performance ratio. For broader compatibility, review the related Fepy alternatives listed above to see which best fits your system.