PowerSafe LED Floodlight 50W Daylight PSLED FL50 DL

The principal specifications are a rated power of 50W, 6500K daylight colour temperature, 220-240V AC operating voltage, 50/60Hz frequency and IP65 ingress protection. It uses LED lighting technology and is non-dimmable. Buyers should confirm model number PSLED FL50 DL when matching project schedules, replacement units or purchase orders.

This floodlight is suitable for compatible lighting applications such as building exteriors, boundary walls, entrances, driveways, loading areas, workshops, warehouses, construction compounds, garden areas and residential outdoor spaces. Final suitability depends on the required illumination level, mounting height, beam coverage, environmental conditions and project lighting design.

Its IP65 rating makes it suitable for many outdoor locations because a correctly installed enclosure is dust-tight and protected against water jets. However, IP65 does not mean the fitting can be submerged. In UAE outdoor conditions, install it with weather-resistant wiring accessories, secure cable entry and suitable sealing, while avoiding locations subject to flooding or prolonged immersion.

A 6500K colour temperature produces a cool white, daylight-style appearance. This colour is commonly selected for work areas, yards, access routes, workshops and construction zones where clear, bright-looking illumination is preferred. It is visually cooler than warm white lighting and may not be appropriate where a softer decorative atmosphere is required.

Isolate the electrical supply, select a structurally sound mounting surface and secure the floodlight bracket using fixings appropriate for the substrate, such as concrete, blockwork or steel. Aim the fitting toward the required area, complete the electrical connection using correctly rated weatherproof accessories and ensure all cable entries are sealed. Installation, testing and energisation should be performed by a qualified electrician in accordance with the manufacturer's requirements and applicable UAE authority regulations.

The floodlight is rated for a 220-240V AC supply at 50/60Hz, which is compatible with commonly used UAE low-voltage installations when correctly connected. The circuit must include suitable isolation, earthing where required and correctly selected protective devices. Confirm the actual site voltage and project requirements before installation.

No. The PSLED FL50 DL is specified as non-dimmable and should not be connected to a standard dimmer. It may be operated through a compatible on/off switch or appropriately rated automatic control, such as a timer, photocell, contactor or motion sensor, provided the control can handle the LED driver's switching and inrush characteristics.

It can be used for fixed illumination in compatible construction areas, including access points, storage zones, building perimeters and work compounds. The 220-240V rating means the fitting must only be installed on a suitable protected supply. It should not be treated as a portable reduced-voltage site light unless the project's risk assessment and electrical design specifically permit its use.

The required quantity cannot be determined from wattage alone. A lighting calculation should consider the area's dimensions, mounting height, spacing, beam distribution, surface reflectance, obstructions and the target illuminance in lux. Contractors should also verify the fitting's published lumen output and photometric data before preparing a compliant lighting layout.

Mount the fitting high enough to distribute light across the target area, but not so high that useful illumination is significantly reduced. Angle it downward toward the working surface and away from roads, neighbouring properties and direct lines of sight to limit glare and light spill. The bracket, fasteners and supporting structure must be suitable for the fitting weight, substrate and expected wind exposure.

IP65 indicates that the enclosure is dust-tight and protected against water jets when the floodlight is correctly assembled and installed. This rating does not cover immersion, flooding, pressure washing at close range or incorrectly sealed field wiring. The installation method and condition of seals, glands and junction boxes are essential to maintaining outdoor protection.

Contractors should consider local heat, airborne dust, humidity, coastal salinity, wind exposure and the condition of the mounting surface. Electrical work should comply with the applicable requirements of the relevant UAE authority, project specifications and recognized wiring practices. Outdoor cable glands, junction boxes, cables, isolators and protective devices should have ratings appropriate to the installation environment.

IP65 addresses dust and water ingress but does not by itself confirm resistance to salt corrosion. For coastal or highly corrosive locations, verify the housing material, coating and fastener suitability with the manufacturer. Use corrosion-resistant fixings and inspect the fitting regularly for coating damage, rust and deterioration around cable entries.

Switch off and isolate the circuit before maintenance. Periodically remove dust and dirt from the lens and housing with a soft, damp cloth, check that mounting bolts remain secure and inspect seals, cable glands and wiring accessories for damage. Do not use abrasive cleaners or direct high-pressure water at the enclosure. A qualified electrician should investigate flickering, water entry, overheating or physical damage.