Name: 50mm x 1 1/2" PPR Female Adaptor Pipe Fitting
Brand: Fepy
SKU: 19418-NOS
Price: 22.50 AED
Availability: InStock

Question 1

What is the PPR Female Adaptor Pipe Fitting and what is it used for?

Accepted Answer

The PPR Female Adaptor Pipe Fitting is a polypropylene (PPR) connector designed to join two pipes or fittings with female connection ends. It provides a secure, corrosion-resistant link for both cold and hot water systems, allowing you to extend or reconfigure PPR piping with a reliable, leak-free joint.

Question 2

What material is this adaptor made from and what are its advantages?

Accepted Answer

It’s made from high-quality PPR (polypropylene random copolymer). PPR fittings are durable, lightweight, corrosion-resistant, and capable of withstanding a wide range of temperatures and pressures, making them suitable for domestic water supply systems.

Question 3

What sizes are available for this PPR female adaptor?

Accepted Answer

This fitting is offered in multiple sizes to fit different pipe diameters. To see the exact available sizes for this product on Fepy, please check the product options on the listing page for this item.

Question 4

How does the PPR female adaptor connect to pipes? Can I use it with standard pipes?

Accepted Answer

The adaptor is designed to connect with standard PPR pipes. It is intended to create a secure female-to-pipe or female-to-female connection using the common joining methods used for PPR systems. Ensure you use the recommended joining method for your system (such as appropriate fusion or solvent cement per your local code and product guidance).

Question 5

Can this adaptor be used for both hot and cold water systems?

Accepted Answer

Yes. The PPR Female Adaptor Pipe Fitting is suitable for connecting pipes in both cold and hot water supply systems, aligning with typical PPR piping practices.

Question 6

What are the temperature and pressure capabilities of this fitting?

Accepted Answer

The fitting is designed to handle a wide range of temperatures and pressures typical of PPR piping. Exact ratings depend on the size and application, so please refer to the product specification on the listing page for the specific size you’re considering.

Question 7

How should I install this adaptor? Are there step-by-step guidelines?

Accepted Answer

General installation steps:
- Verify the correct size for your pipe.
- Cut the pipe square and deburr the edge.
- Clean the pipe ends to remove debris and moisture.
- Dry-fit the connection to ensure proper alignment.
- Join using the method recommended for your PPR system (fusion/solvent cement or mechanical join, per local codes and product guidelines).
- Check for leaks after depressurizing and pressurizing the system.
Always follow the installation instructions provided with the fitting and your local plumbing codes.

Question 8

Are there safety or compliance considerations I should know about?

Accepted Answer

Yes. Use materials that meet local plumbing standards and ensure proper depressurization before installation. PPR fittings are widely used in drinking-water systems, but always verify compliance with your local codes and the product’s spec sheet. Handle all fittings according to safety guidelines and store away from extreme heat or direct sunlight when not in use.

Question 9

How do I choose the right size and ensure a proper fit?

Accepted Answer

Measure your pipe's outer diameter and match it to the adaptor size that corresponds to that diameter. If you’re unsure, refer to the available size options on the product page and select the size that precisely fits your pipe. When in doubt, contact Fepy support for guidance.

Question 10

How does this adaptor compare to similar fittings on Fepy?

Accepted Answer

For alternatives available on Fepy, you can compare these options:
- PPR Male Adaptor Pipe Fitting: https://fepy.com/product/ppr-male-adaptor-pipe-fitting
- PPR Union Connector: https://fepy.com/product/ppr-union-connector
- PPR Tee Fitting: https://fepy.com/product/ppr-tee-pipe-fitting
These provide different connection configurations (male, union, or tee) that can be used depending on your piping layout. Review their specifications and compatibility with your system to choose the best option.

Question 11

What is the return policy for this item?

Accepted Answer

If you need to return this item, refer to Fepy’s return policy on their site for details including eligibility, time frames, and conditions. This helps ensure you understand any requirements before returning.

Question 12

What other accessories or components should I consider pairing with this adaptor?

Accepted Answer

To complete a PPR installation, consider pairing with compatible PPR pipes, end caps, and the appropriate joining method (e.g., PPR solvent cement or heat-fusion tools) as recommended by your piping system. Check the product page for recommended accessories and compatible sizes.

50mm x 1 1/2" PPR Female Adaptor Pipe Fitting

Features & Benefits

Specification

Attachments

Frequently Asked Questions