25mm x 3/4" PPR Female Tee Pipe Fitting

Measure the pipe’s diameter and compare it with the sizes offered for the PPR Female Tee. Ensure the chosen size matches your pipe and that any adapters or additional fittings are compatible with both PPR and any non-PPR pipes in your system. If in doubt, contact Fepy support for guidance.

If you’re not satisfied with your purchase, check Fepy’s return policy for items returned in original condition and packaging within the specified window. Retain your order and proof of purchase to initiate a return.

If you’re considering alternatives on Fepy.com, you can explore the following fittings to compare sizes and connection types: - PPR Male Tee Pipe Fitting: https://fepy.com/ppr-male-tee-pipe-fitting - PPR Female Elbow Pipe Fitting: https://fepy.com/ppr-female-elbow-pipe-fitting - PPR Reducing Tee Pipe Fitting: https://fepy.com/ppr-reducing-tee-pipe-fitting - PPR Union Pipe Fitting: https://fepy.com/ppr-union-pipe-fitting - PPR Coupling Pipe Fitting: https://fepy.com/ppr-coupling-pipe-fitting

This fitting is commonly used in residential and commercial water supply lines to split one line into two directions, such as branching to showers, sinks, toilets, or other fixtures, in both hot and cold water installations.

Use clean, dry pipe ends; verify you have the correct size; follow the proper joining method specified for your PPR system; allow any fusion or bonding to cure properly; and test the system under pressure to confirm there are no leaks.

General installation steps: depressurize the system, cut pipes square and deburr the ends, align pipes with the fit­ting’s inlet/outlet, and join using the appropriate PPR joining method (such as heat‑fusion welding or an approved bonding method for your system). After joining, perform a pressure test to verify a leak‑free connection.

The PPR Female Tee is designed for use in hot and cold water systems and is built to withstand typical domestic temperature ranges. For best results, operate within the manufacturer’s specified limits and installation guidelines.

Yes, the fitting can be used with PPR and compatible non-PPR pipes when used with appropriate adapters or joining methods. Always ensure compatibility and follow the correct installation guidelines for mixed materials.

The internal stop limits insertion depth, helping ensure consistent seating and a secure seal. This reduces the risk of over-insertion and contributes to a more leak‑free connection.

The fitting is made from Polypropylene Random Copolymer (PPR), which is known for its durability, corrosion resistance, and ability to withstand high temperatures.

It is made from Polypropylene Random (PPR) plastic, which is corrosion and rust resistant. Key features include an internal stop for easy and secure connections, seamless construction, and suitability for a variety of plumbing systems.

The PPR Female Tee Pipe Fitting is a three-port connector used to join two pipes and branch off a third line in a PPR plumbing system. Made from durable PPR material, it is designed for reliable hot and cold water connections and helps create a tight, leak‑free branch in residential or commercial piping.

This fitting is commonly used in plumbing, heating systems, and industrial applications requiring reliable connections.

The fitting can be installed using heat fusion welding techniques, which create a strong, leak-proof joint between the pipes and fittings.