Name: 25mm PPR Gate Valve
Brand: Fepy
SKU: 19497-NOS
Price: 18.50 AED
Availability: InStock
Rating: 5 (4 reviews)

Question 1

What is a PPR Gate Valve and how does it work?

Accepted Answer

A PPR Gate Valve is a valve made from polypropylene-random copolymer (PPR) designed to control flow in PPR piping systems. When you turn the handle, the internal gate lifts or lowers to start or stop flow, providing a tight seal to prevent leakage. It combines chemical resistance with easy operation and is suitable for various commercial and residential piping setups.

Question 2

What are the key specifications of this PPR Gate Valve?

Accepted Answer

- Material: polypropylene-random copolymer (PPR) for strong chemical resistance
- Temperature tolerance: typically from -20°C to +90°C
- Sealing: reliable seal to prevent backflow or leaks
- Construction: reinforced design for strength and durability
- Compatibility: adaptable to a range of pipe diameters and pressure ratings
- Handling: lightweight and easy to install and maintain

Question 3

How does the self-cleaning function help in practice?

Accepted Answer

The self-cleaning design helps minimize buildup inside the valve, reducing maintenance needs and helping maintain smooth operation over time. This means fewer sticking or leaking issues and more consistent flow control in challenging chemical or mineral-rich environments.

Question 4

What pipe sizes and pressure ratings is this valve compatible with?

Accepted Answer

The valve is designed to adapt to various pipe diameters and pressure ratings. Exact sizes and ratings depend on the specific model and configuration. Always refer to the product sheet or specification section for the available size options and compatible pressure ranges.

Question 5

How do I install the PPR Gate Valve?

Accepted Answer

Basic installation steps:
- Verify compatibility with your PPR piping and fittings
- Shut off the system and drain the line
- Cut the pipe square and deburr the edges
- Clean the pipe ends to remove debris
- Align the valve with the piping and attach using appropriate adapters or connectors
- Tighten connections securely and check for alignment
- Slowly restore service and test for leaks
If your system uses compression or fusion fittings, follow those specific installation procedures.

Question 6

What maintenance is required for this valve?

Accepted Answer

Maintenance is typically low due to the self-cleaning design. Periodically inspect for leaks around connections, ensure the stem operates smoothly, and keep the accessible surfaces clean. If any leakage or sticking occurs, inspect seals and fittings and replace as needed.

Question 7

What are common use cases for this PPR Gate Valve?

Accepted Answer

Common applications include residential and commercial water distribution, chemical handling lines, and any PPR piping systems requiring reliable on/off control. Its wide temperature tolerance and chemical resistance make it suitable for varied fluids within the stated limits.

Question 8

What safety and compliance considerations should I know?

Accepted Answer

Use the valve within its rated temperature and chemical compatibility. If deploying in potable water or regulated systems, confirm local codes and certifications are met. Avoid exposing the valve to fluids or conditions beyond its design specifications and ensure proper installation to prevent leaks or failures.

Question 9

How does this PPR Gate Valve compare to PVC, CPVC, and Brass gate valves on Fepy?

Accepted Answer

Comparisons (all available on Fepy):
- PVC Gate Valve: typically budget-friendly and good for cold water; lower temperature tolerance and chemical compatibility than PPR.
- CPVC Gate Valve: higher temperature tolerance than PVC and better chemical resistance; generally more expensive than PVC and PPR options.
- Brass Gate Valve: very durable with strong heat tolerance; often more robust but heavier and pricier, and may present galvanic considerations in some systems.
For actual product pages, see these related items on Fepy: PVC Gate Valve - https://fepy.com/product/pvc-gate-valve, CPVC Gate Valve - https://fepy.com/product/cpvc-gate-valve, Brass Gate Valve - https://fepy.com/product/brass-gate-valve

Question 10

What buying decision factors should I consider (returns, value, lifespan)?

Accepted Answer

Consider the valve’s compatibility with your piping, the chemical environment, and temperature requirements. Evaluate long-term value based on durability, maintenance needs, and ease of installation. For returns or policy details, refer to Fepy’s returns information on the site and the product page—these terms apply if you need to return or exchange the item.

Question 11

Can I retrofit this valve into an existing PPR system?

Accepted Answer

Yes, the valve is designed to adapt to different PPR piping configurations. To retrofit, ensure the new valve’s connections match your pipe size and use appropriate adapters or fittings. Verify the line is depressurized before replacing and perform leak tests after installation.

Question 12

What tools or equipment do I need to operate or install this valve?

Accepted Answer

You’ll typically need standard hand tools for fittings (e.g., a wrench for adapters) and the appropriate PPR-compatible connectors or couplings. No special tools are required beyond what your PPR system already uses, but follow the manufacturer’s installation instructions for the exact configuration.

25mm PPR Gate Valve

Features & Benefits

Specification

Attachments

Customer Reviews

Frequently Asked Questions