Cosmoplast PPR Union, 63mm, Threaded Connector

The PPR Union Adaptor Pipe Fitting is a threaded union connector used to join PPR pipes. It provides a quick, removable, leak‑proof connection for hot and cold water systems, allowing easy assembly and disassembly when needed.

It is made from high‑grade polypropylene (PPR). Key specs include resistance to corrosion and pressure, suitability for hot and cold water, a built‑in leak‑proof design, and compatibility with various pipe sizes via a threaded union for easy connections and disconnections.

1) Confirm the pipe size matches the fitting. 2) Cut and deburr the PPR pipe to a square edge. 3) Align the pipe with the union adaptor and hand‑tighten the union nuts. 4) Use a wrench to snug the connections without overtightening. 5) Check for leaks by running water and inspecting the joints. If used in hot water, ensure the system has cooled before final tightening.

Both are designed for easy, removable PPR connections. The primary difference is that the environment and specific threaded components may vary slightly by model; the Threaded Nut version typically emphasizes a slightly different tightening mechanism. For side‑by‑side details, you can compare their listings here: https://fepy.com/product/ppr-union-adaptor-pipe-fitting and https://fepy.com/product/ppr-union-adaptor-threaded-nut

This fitting is ideal for residential and commercial hot or cold water piping where you need a reliable, removable joint. Use cases include repairing sections of PPR piping, creating serviceable connections in tight spaces, or connecting two pipes of different sizes in a secure, leak‑proof manner.

The Union Adaptor is available in multiple sizes to fit different PPR pipe diameters. To choose the right size, measure the outer diameter of your PPR pipes and select the matching adaptor size from the product options. If you’re unsure, check the product listing or contact support for guidance.

Yes. The fitting is designed for potable water systems and is constructed from polypropylene, which is commonly used for drinking water piping. Always ensure you comply with local plumbing codes and standards when installing any fittings.

Regularly inspect the joints for signs of leakage or wear. Avoid overtightening the union nuts, which can damage threads. Use compatible sealants or lubricants if recommended by the manufacturer, and service or replace the adaptor if you notice any cracks or persistent leaks.

If the item is unused and returned within the specified window, most listings offer a return option. Check the Fepy return policy on the product page for details such as timeframes, condition requirements, and how to initiate a return.

PPR fittings typically offer lower material cost, good chemical resistance, and easier installation (especially for plastic piping) with no need for threading or soldering. Metal unions can be more robust in certain environments but may be heavier, more expensive, and require tools like soldering or threading. For a direct comparison, review PPR options on Fepy: https://fepy.com/product/ppr-union-adaptor-pipe-fitting and related metal‑based options if available on the site.

Yes. Ensure pipes are cut square and deburred, use the correct size adaptor, clean threads, tighten evenly, and avoid overtightening. After installation, test the joints with water pressure and inspect for leaks. If you detect leaks, disassemble and re‑seat the joint with proper alignment and tightening.

The fitting is designed for hot and cold water piping and is suitable for general plumbing applications. If you’re incorporating radiant heating, confirm compatibility with your system’s specific PPR piping and local codes, and ensure the operating temperatures and pressures are within the fitting’s rated limits.