PVC Elbow 90 Degree High-UPVC Material and WRAS Approved - Per Pcs

For return terms, please refer to Fepy's standard return policy on the product page or checkout flow. Ensure the item is in compatible condition per the policy guidelines to initiate a return.

Measure your existing UPVC pipe diameter or check the pipe size requirements in your project specs. Then select the elbow with a matching internal bore/outer diameter from the product listing on Fepy to ensure a proper, leak-free fit.

Use cases include creating a corner connection in residential or commercial potable water systems, distributing water in small-scale plumbing projects, or connecting UPVC piping runs where a 90-degree bend is required (provided the pipe sizes match and WRAS approval is applicable for potable use).

If you’re considering alternatives on Fepy, you can explore: - PVC Elbow 90 Degree High-UPVC WRAS Approved - Per Pcs: https://fepy.com/product/pvc-elbow-90-degree-high-upvc-wras-approved-per-pcs - PVC Elbow 90 Degree UPVC WRAS Approved - Plain White: https://fepy.com/product/pvc-elbow-90-degree-upvc-wras-approved-plain-white - UPVC Pipe Elbow 90 Degree: https://fepy.com/product/upvc-pipe-elbow-90-degree These options are all 90-degree UPVC elbows,WRAS-approved, and available on Fepy. Compare diameter compatibility, visibility of coating or finish, and the specific listing details to choose the best fit for your piping setup.

WRAS approval means the product has been assessed for compliance with UK water regulations for safe potable water use. It provides assurance that the fitting is suitable for use in drinking-water systems when correctly installed.

UPVC fittings are commonly used for standard domestic plumbing. For outdoor exposure or high-pressure systems, verify that the specific size and pressure rating meet your application and consider using protective measures or alternate rated fittings if required.

Typical installation involves cutting the pipe square, dry-fitting the elbow, then applying UPVC primer and solvent cement rated for UPVC. Insert the pipe fully, align as needed, and allow the cement to cure per the product instructions.

Sizes can vary. Please check the product listing on Fepy for the available pipe diameters and choose the one that matches your UPVC piping.

Yes. The WRAS approval indicates that the elbow meets requirements for use with potable water when used with appropriately compatible pipework and materials.

Key specs are: 90-degree elbow angle, High-UPVC material for durability and corrosion resistance, WRAS approval for potable water suitability, and it is supplied as a single-piece fitting.

This is a single-piece PVC elbow fitting with a 90-degree bend, designed to connect UPVC piping at corners in plumbing systems. It’s suitable for use in general UPVC plumbing and is built to resist corrosion, making it a durable choice for pipe connections.

For return terms, please refer to Fepy's standard return policy on the product page or checkout flow. Ensure the item is in compatible condition per the policy guidelines to initiate a return.

Measure your existing UPVC pipe diameter or check the pipe size requirements in your project specs. Then select the elbow with a matching internal bore/outer diameter from the product listing on Fepy to ensure a proper, leak-free fit.

Use cases include creating a corner connection in residential or commercial potable water systems, distributing water in small-scale plumbing projects, or connecting UPVC piping runs where a 90-degree bend is required (provided the pipe sizes match and WRAS approval is applicable for potable use).