1 1/2" x 90 Degree PVC Female Threaded Elbow - Per Pcs

Match the pipe size to the elbow’s female thread diameter, confirm the pipe material is PVC, consider whether you need a UV-resistant outdoor option, and decide if a threaded (for a secure seal) or push-fit/slip variant better fits your installation. Always verify the available sizes and compatibility on the product page before purchasing.

Recommended items include PTFE tape or appropriate pipe thread sealant, a pipe cutter or saw for straight cuts, a deburring tool, clean rags, and a wrench for tightening the connection to the specified snugness without overtightening.

Return policies vary by seller on Fepy. Typically, items must be unused and in original packaging within a set window. Check the product page or your order dashboard for the exact return window and conditions, and follow the stated return process.

Yes. Ensure the fitting is rated for your system’s pressure and temperature, and that it complies with local plumbing codes. Use appropriate thread sealant or PTFE tape on threaded connections, avoid exposure to chemicals that may degrade PVC, and confirm outdoor UV exposure requirements align with the product’s sun-protection features.

If you need a different connection type, you can consider: - PVC Male Threaded Elbow 90 Degree: https://fepy.com/product/pvc-male-threaded-elbow-90-degree (useful when you need a male-threaded end) - PVC Push-Fit Elbow 90 Degree: https://fepy.com/product/pvc-push-fit-elbow-90-degree (tool-free, faster installation but different compatibility) - PVC Slip/Socket Elbow: https://fepy.com/product/pvc-slip-elbow-90-degree (glueless slip-fit option for certain systems) Note: Choose based on your pipe type, threading, and ease of installation requirements.

Ideal for routing PVC piping in outdoor and indoor plumbing, irrigation systems, roof drainage, and other installations where a 90-degree turn is needed and UV exposure is a consideration.

General steps: (1) ensure the system is depressurized and surfaces are clean. (2) Cut and deburr the pipe ends to be square. (3) clean the male threads and apply suitable thread sealant or PTFE tape. (4) hand-tighten the elbow onto the male threaded pipe, then snug with a wrench without overtightening. (5) inspect for leaks after re-pressurizing the system. Always follow the illustrated instructions included with the product.

Size options vary by listing. Check the product page for the available diameter options to match your pipe size (e.g., different nominal sizes). If you’re unsure which size you need, share your pipe diameter and we’ll help identify the correct fit.

The elbow is made from PVC, which offers durability and resistance to corrosion.

The label indicates enhanced UV resistance and environmental protection, helping the elbow resist sun exposure and corrosion. This can contribute to a longer outdoor service life compared with standard PVC fittings.

It's a 90° pipe fitting with a female threaded end that connects to a male-threaded PVC pipe, allowing piping to change direction. Sold per piece, it's commonly used in residential and commercial plumbing, irrigation, and drainage applications.

Yes, PVC material provides resistance to many chemicals commonly found in plumbing systems.

While specific certifications are not mentioned, its PVC construction ensures compliance with general plumbing standards.

Yes, it is compatible with various PVC pipes due to its threaded connection.