PVC Male Thread Adaptor - Per Pcs

Key features include durable PVC material, corrosion and heat resistance, a standard 1/2" male thread, the ability to connect pipes with different thread types on each end, and a design that aims to provide a tight seal to minimize leaks. It is sold per piece.

The listing notes a standard 1/2" male thread. Fepy typically offers multiple sizes, so check the product page for the available size options and select the one you need.

Install by ensuring both fittings are clean and dry. Apply PTFE tape (Teflon tape) or a suitable pipe thread sealant to the male threads, then thread the adaptor into the corresponding female fittings by hand and snug with a wrench. Avoid overtightening to prevent damage.

It's suitable for water supply, irrigation, and drainage applications that use PVC piping. It’s designed for general, non-extreme temperature and pressure conditions typical of standard PVC systems.

This adaptor is designed for PVC fittings. For transitions to CPVC or metal piping, use compatible adapters or transition fittings that are rated for those materials and applications.

PVC is known for corrosion resistance and good chemical compatibility, which helps ensure a long service life in common plumbing, irrigation, and drainage uses. Durability also depends on proper installation and operating conditions.

PVC adapters are generally lighter, cheaper, and corrosion-resistant, making them suitable for many residential and irrigation tasks. Brass or other metal adapters may handle higher temperatures and pressures better but can be more expensive and heavier. See related products for specific comparisons.

If you’re comparing, you can look at these related items on Fepy: PVC Male Thread Adaptor (3/4 in) – https://fepy.com/product/pvc-male-thread-adaptor-3-4-in and PVC Female Thread Adaptor – https://fepy.com/product/pvc-female-thread-adaptor-per-pcs. For a metal alternative, Brass Male Thread Adaptor – https://fepy.com/product/brass-male-thread-adaptor-per-pcs.

Use a suitable pipe-thread sealant or PTFE tape (Teflon tape) rated for PVC. Apply 2–3 wraps in the direction of tightening on the male threads before installing the adaptor.

The item is sold per piece, so you’ll receive one adaptor per purchase. Store in a cool, dry place away from direct sunlight to maintain material integrity.