Atlas PVC Reducer Bush 63mm × 50mm, Space-Saving Step-Down, Solvent-Weld, Low Turbulence

The reducer bush is constructed from PVC, offering corrosion resistance and durability. It is UV-resistant to stand up to outdoor exposure, though for extended outdoor service you should consider additional UV protection to maximize life.

Size compatibility: connects 63 mm pipe to a 50 mm socket; Material: PVC; Construction: corrosion and wear-resistant; UV-resistant for outdoor use; Easy solvent-weld installation; Smooth bore for low turbulence and improved flow; Suitable for residential, industrial, and commercial plumbing.

Prepare surfaces by cleaning and ensuring they’re dry. For solvent-weld installations, apply the appropriate primer (if required by the cement you use) to both the pipe and the socket, then apply solvent cement evenly. Push the 63 mm pipe into the reducer until it seats fully, twist slightly to distribute cement, and hold until the joint sets per the cement manufacturer’s instructions.

It’s ideal for stepping down from a larger mains line to smaller branches or equipment ports, such as irrigation mains feeding smaller irrigation lines, RO systems, water treatment lines, or other PVC plumbing networks where a 63 mm to 50 mm transition is needed.

The component is PVC and UV-resistant, suitable for outdoor routing with basic UV protection. If you’re filling potable water lines, verify compatibility with your local codes and the specific cement/primer you plan to use, as some installations require potable-water-rated materials.

For close matching options on Fepy.com, you can explore alternatives like: Atlas PVC Reducer Bush 63mm × 40mm (URL: https://www.fepy.com/products/atlas-pvc-reducer-bush-63mm-40mm) and Atlas PVC Reducer Bush 75mm × 50mm (URL: https://www.fepy.com/products/atlas-pvc-reducer-bush-75mm-50mm). These provide different reduction sizes while maintaining a similar solvent-weld, low-turbulence design.

Key steps are accurate surface preparation, correct application of solvent-weld cement, and ensuring the joint is fully seated. Use a smooth, straight insertion to avoid gaps, and let the joint cure per the cement manufacturer’s guidelines to prevent leaks and reduce turbulence in the bore.

Work in a well-ventilated area and wear appropriate PPE (gloves and eye protection). Follow the solvent cement manufacturer’s safety instructions, avoid inhaling fumes, and keep solvents away from open flames. Store PVC fittings in a cool, dry place away from direct sunlight when not in use.

Yes, you can return or exchange the item subject to Fepy’s standard return terms. Ensure the product is in unused condition and the packaging is intact to qualify for a return or exchange.

Yes. Avoid skipping surface cleaning or primer when required, over- or under-applying solvent cement, forcing the pipe into the socket, and reusing old joints. Also ensure the correct orientation and avoid twisting too aggressively during insertion, which can compromise the seal and flow.