1" PVC Socket

The 1" PVC socket is rated for a maximum pressure of 16 bar at temperatures up to 60°C, making it suitable for various industrial applications, including water treatment and chemical processing.

The socket is made from PVC-U (unplasticized polyvinyl chloride), which offers excellent chemical stability, high strength, and good weather resistance. It is also self-extinguishing under fire conditions.

The operating temperature range for the PVC socket is from 0°C to 60°C, making it suitable for a variety of environments, though exposure to temperatures exceeding this range should be avoided.

Connections with the PVC socket are made using solvent cement, ensuring a strong, secure, and leak-proof bond between the socket and the pipe.

PVC sockets are suitable for drinking water applications, provided they meet specific certifications for health safety standards, though it's always recommended to verify compatibility with local regulations.

Typical applications for the 1" PVC socket include water treatment, chemical processing, and various industrial piping systems due to its durability and resistance to aggressive media.

A PVC Socket is a plastic plumbing fitting designed to connect PVC pipes. It provides a secure, leak‑proof connection when joined with PVC solvent cement, and it is sold per piece.

The joint is formed by cleaning the pipe ends, applying PVC primer (if required) and then solvent cement. The socket slides over the pipe end and welds a durable, watertight connection once the cement cures.

The fitting is made from durable PVC, designed to resist corrosion and UV exposure. It supports high‑pressure applications and is intended for easy, fast installation when used with compatible PVC solvent cement.

The PVC Socket fittings are designed to handle high pressure and temperature within the limits of the PVC system and solvent cement used. Always ensure you select the correct socket size and adhere to the system ratings for your project.

Yes. The fittings are UV resistant and corrosion resistant, making them suitable for use in environments exposed to sunlight and common outdoor conditions.

Steps: 1) Cut the pipe square and deburr. 2) Dry fit to verify fit. 3) Clean and, if needed, prime the pipe ends. 4) Apply PVC solvent cement to the pipe and inside the socket. 5) Push the pipe into the socket and hold briefly until the joint sets. 6) Allow proper curing time before testing for leaks.

The product is described as safe for use with food and beverage applications, provided it is used with appropriate sanitary practices and compatible materials in contact with consumables.

Socket size corresponds to the pipe diameter you’re connecting. Check the product listing for the exact size, and measure your pipe outside diameter to ensure a proper fit. If in doubt, compare with similar fittings listed on Fepy.