50mm PVC Socket - Per Pcs

The joint is formed by cleaning the pipe ends, applying PVC primer (if required) and then solvent cement. The socket slides over the pipe end and welds a durable, watertight connection once the cement cures.

The fitting is made from durable PVC, designed to resist corrosion and UV exposure. It supports high‑pressure applications and is intended for easy, fast installation when used with compatible PVC solvent cement.

The PVC Socket fittings are designed to handle high pressure and temperature within the limits of the PVC system and solvent cement used. Always ensure you select the correct socket size and adhere to the system ratings for your project.

Yes. The fittings are UV resistant and corrosion resistant, making them suitable for use in environments exposed to sunlight and common outdoor conditions.

Steps: 1) Cut the pipe square and deburr. 2) Dry fit to verify fit. 3) Clean and, if needed, prime the pipe ends. 4) Apply PVC solvent cement to the pipe and inside the socket. 5) Push the pipe into the socket and hold briefly until the joint sets. 6) Allow proper curing time before testing for leaks.

The product is described as safe for use with food and beverage applications, provided it is used with appropriate sanitary practices and compatible materials in contact with consumables.

Socket size corresponds to the pipe diameter you’re connecting. Check the product listing for the exact size, and measure your pipe outside diameter to ensure a proper fit. If in doubt, compare with similar fittings listed on Fepy.

Common use cases include domestic plumbing connections, water supply lines, irrigation setups, and DIY plumbing projects where a reliable, solvent-welded PVC joint is desired.

If you’re exploring options on Fepy, you can compare with similar PVC socket fittings by size or pressure rating. Here are a few related options available on Fepy you can review: - PVC Socket Fitting 20mm: https://fepy.com/pvc-socket-20mm - PVC Socket Fitting 25mm: https://fepy.com/pvc-socket-25mm - PVC Socket Fitting 32mm: https://fepy.com/pvc-socket-32mm - PVC Socket Fitting 40mm: https://fepy.com/pvc-socket-40mm

Work in a well‑ventilated area. Wear gloves and eye protection when applying solvent cement. Avoid skin contact with cement and fumes, and keep solvents away from heat, flames, and children. Store fittings in a cool, dry place away from direct sunlight.

Store unused fittings in a clean, dry place. After installation, inspect joints for leaks and ensure the cement has fully cured before pressurizing the system. Routine inspection during use helps maintain reliable performance.