Rust-Oleum 12oz Chalked Matte Spray Paint - Blush Pink

It works well on wood, metal, ceramic, and canvas. It’s formulated for interior use and offers good adhesion with minimal surface prep on most surfaces.

No primer is required for most surfaces. For extremely glossy, dirty, or heavily textured surfaces, a light cleaning or gentle sanding is recommended to optimize adhesion.

Shake the can well, remove the cap, and test spray. Hold the can about 6–12 inches from the surface and apply light, even coats with a slight overlap. Let the first coat dry to the touch (about 20 minutes) before applying additional coats.

One 12 oz can covers up to 12 square feet, depending on surface texture and porosity.

Yes, it is intended for indoor use. Use in a well-ventilated area, away from heat and open flames, and wear appropriate protective gear if you’re sensitive to fumes.

It dries to the touch in about 20 minutes. You can apply additional coats after it dries; full cure time depends on ambient conditions.

The finish and adhesion are the same across colors; Blush Pink provides a soft pink hue, while other colors (e.g., Linen White or Graphite) offer different shades but share the same chalky finish and coverage. Examples: Linen White variant: https://fepy.com/products/rust-oleum-chalked-ultra-matte-spray-paint-linen-white and Graphite variant: https://fepy.com/products/rust-oleum-chalked-ultra-matte-spray-paint-graphite.

You might also look at other Rust-Oleum Chalked Ultra Matte colors such as Linen White: https://fepy.com/products/rust-oleum-chalked-ultra-matte-spray-paint-linen-white and Graphite: https://fepy.com/products/rust-oleum-chalked-ultra-matte-spray-paint-graphite. These share the same formula and finish with different color options.

Yes, you can apply a clear topcoat or wax over the Chalked Ultra Matte finish to increase durability and water resistance, as long as the topcoat is compatible with spray-applied chalk paint.

If you’re not satisfied, you can initiate a return according to Fepy’s standard returns process. For assistance, contact Fepy support.

For best results, apply additional light coats after the previous layer is dry to correct color or coverage. If needed, lightly sand between coats for smoother results, and always apply the final color with even, thin layers.