Rockany 18L Marble Glue

The best application temperature is 10℃ above or below the local average temperature, with a minimum of 5℃. Thermal insulation measures are needed if the temperature falls below 5℃.

Mix 100 parts of adhesive with 1-3 parts hardener thoroughly. Apply the mixture to a dry, clean, and slightly rough surface using a suitable tool.

Avoid returning mixed glue to the original can, store it in a dry and shaded place, and tightly close the lid after use. Do not expose bonded parts to wet or frosty conditions.

The glue has a shelf life of 12 months if stored away from heat, humidity, and sunlight.

Store the adhesive at temperatures below 35℃. If room temperature exceeds 35℃, cooling measures should be implemented to maintain product quality.

No, for bonding hanging parts, it is recommended to use epoxy AB Adhesive instead of Rockany Marble Glue.

Clean tools immediately after use with a special solvent to prevent residue buildup.

Rockany Marble Glue is a fast-drying adhesive designed to bond marble surfaces. It provides a durable, water-resistant bond suitable for repairs and installations on marble materials, usable for both interior and exterior projects.

It's specially formulated for marble surfaces and can work on damp surfaces as well, making it suitable for marble repairs or installations in areas with humidity or occasional moisture.

Yes. Rockany Marble Glue is designed for repairs and installations on marble and is water-resistant, so it’s appropriate for areas near water or moisture.

Prepare the surfaces by cleaning and drying them. Apply a thin bead of glue to one surface using a small spatula, press the pieces together firmly, and wipe away any excess while it’s wet. For best results, hold or clamp the pieces in place until the bond begins to set.

Holding the pieces firmly in place is important. If possible, clamp or apply light pressure during setting, then allow the bond to cure. Wipe away excess glue as you work to keep surfaces clean.

Key properties include a water-resistant, durable bond, a fast-drying formula, and suitability for interior and exterior marble applications.

Yes. The product page provides a Safety Data Sheet (SDS) with handling instructions, hazards, and first-aid information. Refer to the SDS for safe use.